Related Manuals for Bosch DIVAR IP all-in-one 4000
Summary of Contents for Bosch DIVAR IP all-in-one 4000
- Page 1 DIVAR IP all‑in‑one 4000 DIP‑4420IG‑00N | DIP‑4424IG‑2HD | DIP‑4428IG‑2HD | DIP‑442IIG‑2HD Installation manual...
-
Page 3: Table Of Contents
DIVAR IP all-in-one 4000 Table of contents | en Table of contents Safety Safety message explanation Installation precautions Electrical safety precautions ESD precautions Operating precautions Service and maintenance precautions Cybersecurity precautions FCC compliance Software precautions 1.9.1 Use latest software 1.9.2... -
Page 4: Safety
| Safety DIVAR IP all-in-one 4000 Safety Read, follow, and retain for future reference all of the following safety instructions. Safety message explanation Warning! Indicates a hazardous situation which, if not avoided, could result in death or serious injury. -
Page 5: Electrical Safety Precautions
DIVAR IP all-in-one 4000 Safety | en Notice! If you install this device in an enclosure, make sure that the enclosure is adequately ventilated according to the manufacturer’s instructions. Caution! Installation precaution Do not place this device on an unstable stand, tripod, bracket, or mount. The device may fall, causing serious injury to persons and damage to the device. - Page 6 | Safety DIVAR IP all-in-one 4000 Notice! Permanently connected devices must have an external, readily operable mains plug or all‑pole mains switch in accordance with installation rules. Notice! Pluggable devices must have an easily accessible electrical outlet installed near the equipment.
-
Page 7: Esd Precautions
DIVAR IP all-in-one 4000 Safety | en Warning! Use only one hand when working with powered-on electrical equipment. This is to avoid making a complete circuit, which will cause electrical shock. Use extreme caution when using metal tools, which can easily damage any electrical components or circuit boards they come into contact with. -
Page 8: Service And Maintenance Precautions
State of California to cause birth defects and other reproductive harm. Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. -
Page 9: Cybersecurity Precautions
Limit local network access to trusted devices only. Details are described in the following documents which are available in the online product catalog: – Network Authentication 802.1X – Cybersecurity guidebook for Bosch IP video products – For access through public networks use only the secure (encrypted) communication channels. Bosch Security Systems B.V. -
Page 10: Fcc Compliance
Bosch assumes no liability whatsoever for any damage caused by operating its products with outdated software components. You can find the latest software and available upgrade packages in the Bosch Security and Safety Systems download store under: https://downloadstore.boschsecurity.com/ 1.9.2 OSS information Bosch uses Open Source Software in the DIVAR IP all-in-one products. - Page 11 DIVAR IP all-in-one 4000 Safety | en C:\license txt\ The licenses of Open Source Software components used in any further software installed on your system, are stored in the installation folder of the respective software, for example under: C:\Program Files\Bosch\SysMgmService\apps\sysmgm-...
-
Page 12: Introduction
Introduction This manual is written for professional system integrators and PC technicians. It provides information for the installation of DIVAR IP all-in-one 4000. Only experienced and qualified technicians should do the installation. Before you start the installation, read and follow the safety instructions. - Page 13 DIVAR IP all-in-one 4000 Introduction | en Bosch Security Systems B.V. 2022-10 | V02 | F.01U.407.904 Installation manual...
-
Page 14: System Overview
Device views DIVAR IP all-in-one 4000 has a compact mini-tower chassis. It has a hinged front cover that hides the hard drives and the control panel. The control panel is located on the front of the device and has power buttons and status monitoring LEDs. - Page 15 DIVAR IP all-in-one 4000 System overview | en Front view Front cover Lock for front cover 2 hard drive bays (for 3.5" hard drives) 4 Air intake filter 2 slot covers Power LED Note: Do not remove! HDD LED Network LED...
-
Page 16: Control Panel Elements
| System overview DIVAR IP all-in-one 4000 Rear view Mains connection DisplayPort port HDMI 2.0 port HDMI 1.4 port 4 USB 3.2 ports (Type A) 2 LAN ports (RJ45), teamed Note: Do not change the teaming mode! Audio output: Line-out... -
Page 17: Hard Drive Tray Leds
DIVAR IP all-in-one 4000 System overview | en Control panel buttons Button Description The power button is used to apply or remove power from the power supply to the system. Note: Turning off system power with this button removes the main power, Power but keeps standby power supplied to the system. -
Page 18: Lan Leds
| System overview DIVAR IP all-in-one 4000 LED state Description Lower hard Not used drive tray LAN LEDs On the rear of the device, there are two LAN ports. Each LAN port has two LEDs. LED state Description LAN 1/LAN 2 Amber flashing Indicates LAN activity. -
Page 19: Installing A Sata Hard Drive
Bosch based on available failure rates. Bosch is not liable for any data loss or damages, or system failures of units equipped with hard drives that are not supplied by Bosch. - Page 20 | Installing a SATA hard drive DIVAR IP all-in-one 4000 1 Release button 2 Hard drive tray handle Notice! Do not operate the device with the hard drive trays removed from the bays. Installing a hard drive tray into a hard drive bay...
-
Page 21: Installing A Non-Bosch-Supplied Hard Drive
Bosch based on available failure rates. Bosch is not liable for any data loss or damages, or system failures of units equipped with hard drives that are not supplied by Bosch. - Page 22 | Installing a SATA hard drive DIVAR IP all-in-one 4000 Use the handle to pull the hard drive tray out of the chassis. 1 Release button 2 Hard drive tray handle Notice! Do not operate the device with the hard drive trays removed from the bays.
- Page 23 DIVAR IP all-in-one 4000 Installing a SATA hard drive | en Remove the plastic bracket from the hard drive tray and place the hard drive tray on a flat surface. Slide a new hard drive into the hard drive tray with the printed circuit board side facing down.
- Page 24 | Installing a SATA hard drive DIVAR IP all-in-one 4000 1 Release button 2 Hard drive tray handle 2022-10 | V02 | F.01U.407.904 Bosch Security Systems B.V. Installation manual...
-
Page 25: Turning On The Unit
Plug the power cord from the power supply unit into a high-quality power strip that offers protection from electrical noise and power surges. Bosch recommends to use an uninterruptible power supply (UPS). Push the power button on the control panel to turn on the unit. -
Page 26: System Setup
| System setup DIVAR IP all-in-one 4000 System setup The Microsoft Windows Server IoT 2022 for Storage Workgroup operating system provides a user interface for initial server configuration, unified storage appliance management, simplified setup and storage management, and support for Microsoft iSCSI Software Target. -
Page 27: First Sign-In And Initial System Setup
DIVAR IP all-in-one 4000 System setup | en Notice! Recorded video streams need to be configured in a way that the maximum bandwidth of the system (BVMS/VRM base system plus iSCSI storage expansions) is not exceeded. First sign-in and initial system setup Notice! Do not change any operating system settings. -
Page 28: Choosing Operation Mode Bvms
| System setup DIVAR IP all-in-one 4000 – Under the Software tab, select BVMS Appliances from the list, then click Select. A list of all available software packages is displayed. – Locate the ZIP file SystemManager_[software version].zip and save it to a storage medium such as a USB stick. -
Page 29: Choosing Operation Mode Vrm
DIVAR IP all-in-one 4000 System setup | en Read and accept the license agreement, then click Install to continue. The installation starts and the installation dialog box shows the installation progress. Do not turn off the system and do not remove the storage media during the installation process. -
Page 30: Signing In To The Administrator Account
| System setup DIVAR IP all-in-one 4000 Signing in to the administrator account Signing in to the administrator account in BVMS operation mode To sign in to the administrator account in BVMS operation mode: On the BVMS desktop, press CTRL+ALT+DEL. -
Page 31: Recovering The Unit
DIVAR IP all-in-one 4000 System setup | en – Volume label: Data (Note: If you have two physical disks to be used as data partitions, name the first one Data and the second one Data2). – Select the Perform a quick format check box. - Page 32 | System setup DIVAR IP all-in-one 4000 Refer to – First sign-in and initial system setup, page 27 2022-10 | V02 | F.01U.407.904 Bosch Security Systems B.V. Installation manual...
-
Page 33: Troubleshooting
DIVAR IP all-in-one 4000 Troubleshooting | en Troubleshooting Overheating Problem Solution An overheating condition has occurred. – Make sure that no cables obstruct the airflow in the system. – Make sure that the fan is present and The system status LED is solid red. -
Page 34: Service And Repair
The storage equipment is shipped with an original manufacturer service and support agreement for hardware. The Bosch technical support is the single point of contact in case of failure but the service and support obligations are fulfilled by the hardware manufacturer or a partner. -
Page 35: Decommissioning And Disposal
DIVAR IP all-in-one 4000 Decommissioning and disposal | en Decommissioning and disposal At a certain point in the life cycle of your product, it might be necessary to replace or to take out of order the device itself or a component. As the device or the component may hold sensitive data, like credentials or certificates, use the proper tools and methods to make sure that your relevant data is securely deleted during decommissioning or before disposal. -
Page 36: Additional Information
For more information, software downloads, and documentation, visit http:// www.boschsecurity.com and go to the respective product page in the product catalog. You can find the latest software and available upgrade packages in the Bosch Security and Safety Systems download store under: https://downloadstore.boschsecurity.com/ 10.2... - Page 37 DIVAR IP all-in-one 4000 Additional information | Bosch Security Systems B.V. 2022-10 | V02 | F.01U.407.904 Installation manual...
- Page 38 | Additional information DIVAR IP all-in-one 4000 2022-10 | V02 | F.01U.407.904 Bosch Security Systems B.V. Installation manual...
- Page 40 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2022 Building solutions for a better life. 202210051722...