Sensor Setting (Sensor) - Toshiba B-EP Series Key Operation Specification
Hide thumbs
Also See for B-EP Series:
- Operation manual (46 pages) ,
- Interface specification (788 pages)
Table of Contents
6.6.5.2.4
Sensor Setting (SENSOR)
This setting selects a sensor to be used.
S E N S O R
S E N S O R
S E N S O R
Default value: NONE (No sensors used, i.e. position is not detected)
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
The default value at power on is NONE (No sensors used, i.e. position is not detected).
N O N E
[PAUSE]
T R A N S .
[PAUSE]
R E F L E C T .
[PAUSE]
- 117 -
No sensors used, i.e. position is not detected
(when using receipt paper)
Transmissive sensor (when using tag paper
with black mark)
Reflective paper (when using label paper)
- Quick Links:
- Key Functions
- Reset
Hide quick links:
Table of Contents
