Fine Adjustment Value Setting Items; Feed Amount Fine Adjustment (Feed Adj.) - Toshiba B-EP Series Key Operation Specification
Hide thumbs
Also See for B-EP Series:
- Operation manual (46 pages) ,
- Interface specification (788 pages)
Table of Contents
6.6.4.2
Fine Adjustment Value Setting Items
6.6.4.2.1
Feed Amount Fine Adjustment (FEED ADJ.)
This setting sets a feed amount so that the label is shifted forward or backward from the print
start position which has been automatically determined.
PAUSE
(1) When the [FEED] key is pressed, the menu moves in the opposite direction from when the
[PAUSE] key is pressed.
(2) When the [PAUSE] key is pressed while the [FEED] key is held down, or when the [POWER] key
is pressed for 3 seconds or more, the display returns to the system mode menu (ADJUST SET).
(3) When the [PAUSE] key or [FEED] key is pressed for 0.5 seconds or more during this fine
adjustment setting, repeat mode is enabled and the key pressed is repeatedly entered.
(4) The change in the fine adjustment value becomes effective when the [POWER] key is pressed
after setting, then stored in the backup memory.
(5) The printer is controlled by the total amount determined by this command and the Position Fine
Adjustment command sent from the PC. However, the maximum value is ±50.0 mm.
(6) When the feed amount fine adjustment value for the positive (+) direction is set to more than
+10.5 mm (the distance between the print head and the sensor is –1 mm), the actual print
position is corrected by +10.5 mm.
(7) The factory default value is +0.0mm.
+0.0 mm
-50.0mm
-49.9mm
-0.1mm
+0.0mm
+3.0 mm
+0.1mm
+49.9mm
+50.0mm
-3.0 mm
Paper feed direction
- 103 -
Print start
One label
position
Print start
One label
position
One label
Print start position
- Quick Links:
- Key Functions
- Reset
Hide quick links:
Table of Contents
