Message System - Siemens SIMATIC HMI Series System Manual
Hide thumbs
Also See for SIMATIC HMI Series:
- Operating instructions manual (288 pages) ,
- Getting started (52 pages) ,
- Installation instructions (2 pages)
Table of Contents
Performance Data
8.4 Message system
8.4
Message system
Configuration
Configurable messages per server/single-user station
Process tags per message line
User text blocks per message line
Message classes (incl. system message classes)
Message types per message class
Message priorities
Runtime
The performance data can be limited by system resources.
Messages per message archive
Messages per short-term archive list
Messages per long-term archive list
Messages per message window
Continuous message load without loss (single-user station/server)
Message surge (single-user station/server)
1) On single-user station or server or on client, per server or per redundant server pair, if
"LongTimeArchiveConsistency" is set to "no". On single-user station, server, client or
redundant server pair, if "LongTimeArchiveConsistency" is set to "yes".
2) On single-user station or server or on client, per server or per redundant server pair.
3) If the interval to the next message surge is under five minutes, messages may be lost.
Note
The message overload and continuous message surge can be created simultaneously on a
single-user station or server.
212
Maximum
150 000
10
10
18
16
17 (0...16)
Maximum
No limit
1 000
1 000
1)
5 000
2)
10/sec
2 000/10 sec every 5 min
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
3)
Table of Contents
