GE DigitalFlow GS868 Programming Manual page 56
Panametrics steam ultrasonic mass flowmeter, 2-channel
Hide thumbs
Also See for DigitalFlow GS868:
- Startup manual (84 pages) ,
- Service manual (74 pages) ,
- Product overview and specifications (4 pages)
Table of Contents
March 2008
Activating Security (cont.)
Procedure Options
1-48
4. Enter the New Password and press
letters and numbers up to a total of 21 characters may be used as a
password.
Note: Keep in mind that the password may have to be entered
frequently from the keypad. A long and/or complex password
may soon become annoying to use.
5. Verify the New Password by entering it again and press
sure to record the new password in a safe place.
After completing the above steps, the meter returns to the
PROGRAM
prompt. Continue as follows:
•
To continue programming the meter, refer to the menu maps in
Appendix A and navigate to the desired menu. Then, proceed to
the appropriate section of this manual for instructions.
•
To leave the User Program and retain the previous settings,
[EXIT]
press
twice and then press
Any programming changes will be discarded and you will be
returned to the data display.
•
To leave the User Program and return to measurement mode,
[EXIT]
press
twice and then press
Your programming changes will be entered into the meter's
memory, and you will be returned to the data display.
Note: See the
SAVE
submenu section on the following page for more
information on this function
[ENT]
. Any combination of
[ENT]
Global
[F1] = NO
at the SAVE prompt.
[F2] = YES
at the SAVE prompt.
Programming Site Data
. Be
Table of Contents
