Mounting Precautions (For Sharp Dealers And Service Engineers) - Sharp PN-HW861 Operation Manual

(For SHARP dealers and service engineers)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. (PN-HW861/PN-HW751:

at least 3 people.)

• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

• Do not use an impact driver.

• When moving the monitor, be sure to hold it with the handles [PN-HW861/PN-HW751] or hold the parts marked by

below [PN-HW651/PN-HW551/PN-HW501/PN-HW431]. Do not grasp the screen. This may cause product damage, failure,

or injury.

[PN-HW651/PN-HW551/PN-HW501]

• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

• Do not use any screw holes other than those for mounting brackets, located on the rear of the monitor, for installation.

Mounting Precautions

5/16 - 3/8 inch (8-10 mm)

Screws (M6)

Mounting bracket

Monitor mounting

[PN-HW431]

41

E