Table of Contents
Controlling the Monitor with a computer (RS-232C)
RS-232C command table
How to read the command table
Command:
Command field (See page 33.)
Direction:
W When the "Parameter" is set in the parameter field (see page 33), the command functions as described
R The returned value indicated under "Reply" can be obtained by setting "????", "
Parameter:
Parameter field (See page 33.)
Reply:
Response (Returned value)
* :
When POWER SAVE MODE is set to OFF:
When POWER SAVE MODE is set to ON:
Power control/Input mode selection
Function
POWER CONTROL
INPUT MODE SELECTION
PICTURE menu
Function
BRIGHT
SIZE (Screen size selection)
COLOR MODE
WHITE BALANCE
R-CONTRAST
G-CONTRAST
B-CONTRAST
SETUP menu
Function
Telnet User name
Telnet Password
THERMAL SENSOR SETTING
Model
Serial no.
AUTO
ALL RESET
34
E
under "Control/Response Contents".
(repeater control) in the parameter field. (See page 33.)
"●/○" : I ndicates a command which can be used in standby mode or when the power is on.
"–" : I ndicates a command which can be used when the power is on. Cannot be used in standby mode.
"●" : I ndicates a command which can be used in standby mode or when the power is on.
"○/–" : Indicates a command which can be used when the power is on. Cannot be used in standby mode.
Command
Direction
Parameter
POWR
W
R
INPS
W
Command
Direction
Parameter
VLMP
WR
WIDE
WR
BMOD
WR
WHBL
WR
CRTR
WR
CRTG
WR
CRTB
WR
Command
Direction
Parameter
USER
WR
XXXXXXXX
PASS
WR
XXXXXXXX
STDR
WR
INF1
R
SRNO
R
ASNC
W
RSET
W
Reply
0
Switches to standby mode.
1
Returns from standby mode.
0 Standby mode
1 Normal mode
2 Input signal waiting mode
0
Toggle change for input mode.
2
D-SUB
10
HDMI1
11
USB
13
HDMI2
18
HDMI3
Reply
0-50
0-50
1-4
1-4 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM
0
0 STD
2
2 VIVID
3
3 sRGB
4
4 HIGH ILLUMINANCE
0-2
0-2 0:THRU, 1:PRESET, 2:USER
0-255
0-255 "ERR" when WHBL is not set to 2.
0-255
0-255
0-255
0-255
Reply
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
0-1
0-1 0: LANDSCAPE, 1: PORTRAIT
Value
Value
1
Adjust CLOCK/PHASE/H-POS/V-POS automatically in D-SUB
0
?" or "???+"
Control/Response contents
Control/Response contents
Control/Response contents
*
●
-
*
-
*
-
Hide quick links:
Table of Contents
