Removing The Wlan Module - Fujitsu Esprimo C series Operating Manual

System expansions

► Open the casing (see

► Remove the drive cage (see

► Disconnect the USB cable of the WLAN module from the connector on the

mainboard. Refer to the manual for the mainboard.

Make sure that you do not scratch the antenna on the front opening of the drive cage.

► Install the drive cage again (see

► Close the casing (see

44

"Opening the casing", Page

"Removing the drive cage", Page

1

1

2

"Installing the drive cage", Page

"Closing the casing", Page

29).

34).

► Remove the screws (1).

► Pull the WLAN module out of the bay (2)

together with the USB cable.

35).

30).

A26361-K1002-Z220-1-7619, edition 2