Omron SYSMAC CS Series Instruction & Reference Manual page 799
Hide thumbs
Also See for SYSMAC CS Series:
- Operation manual (841 pages) ,
- Programming manual (303 pages) ,
- Quick start manual (4 pages)
Table of Contents
Auxiliary Area Words and Bits
The Network Communications Instructions use the communications information in operand I in place of
the Communications Port Enabled Flags in A202 used by previous instructions.
Auxiliary Area
A202.00 to A202.07
A202.08
A203 to 210
A211
A214.00 to A214.07
A215.00 to A215.07
A216 and A217
A218
A219
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Network Communications Instructions
for CJ1/CS1/CJ2
Communications Port Enabled Flag
(communications ports 0 to 7)
Not used.
Communications completion codes for
communications ports 0 to 7
Not used.
First Cycle Flags after Communications
Finished
First Cycle Flags after Communications
Error
Communications Port Completion Code
Storage Address
Used Communications Port Numbers
Communications Port Error Flags
CJ2 Network Communications Instructions
Instruction operand I
Bit 0
(Turns ON when execution has started, and not when execution is
enabled.)
CJ2 Instructions Enabled Flag (default: ON)
Instruction operand I+1
Number of ports available for CJ2 Network Communications Instruction
(A202.08 turns OFF when the value in A211 reaches 0.)
---
---
---
---
Instruction operand I
Bit 1
3. Instructions
3
765
Table of Contents
