1. Manuals
  2. Brands
  3. Philips Manuals
  4. Exercise Bike
  5. ReCare 7.0 R
  6. User manual

Philips ReCare 7.0 R User Manual

Physical therapy solutions
Hide thumbs
Table of Contents

Quick Links

ReCare
Recumbent bike
7.0 R
PTE7000MR
Register your product and get support at
www.philips.com/welcome
User manual
Please read this entire manual carefully
before operating your new recumbent
bike and save it for future use.
Table of Contents
loading

Related Manuals for Philips ReCare 7.0 R

Summary of Contents for Philips ReCare 7.0 R

  • Page 1 ReCare User manual Recumbent bike Please read this entire manual carefully 7.0 R before operating your new recumbent bike and save it for future use. PTE7000MR Register your product and get support at www.philips.com/welcome...
  • Page 2 Thank you for your recent purchase of the Philips physical rehabilitation recumbent bike, 7.0 R Philips physical therapy and exer- cise solutions provide simple, reliable products that o er the most relevant feedback to caregivers and users to achieve best-in-class...

  • Page 3: Table Of Contents

    Contents Important safety instructions Important electrical information Important operation instructions Application speci cation Operating principle Signi cant physical characteristics Signi cant performance characteristic Intended user pro le...
  • Page 4 Operating the 7.0 R Features Operation of your new bike Data transfer software instructions Using a heart rate transmitter Assembly instructions for 7.0 R Maintenance Speci cations Description of packaging symbols...

  • Page 5: Important Safety Instructions

    Important safety instructions Attention Read all instructions in this manual before using this device. Danger To reduce the risk of electric shock disconnect your from the electrical outlet prior to cleaning and/or service work. Warning • Do not modify this equipment without authorization of the manufacturer.
  • Page 6 • Do not use any after market parts on this device, other than those recommended by Philips. • Do not attempt any servicing or adjustments other than those described in this manual.
  • Page 7 • Hold the handlebar for support when getting on or o the bike. • To avoid injury please observe all minimum and maximum seat adjustment settings. • Never drop or insert any object into any openings. • Do not use outdoors. •...

  • Page 8: Important Electrical Information

    • The recumbent bike is not suitable for use in an oxygen rich envi- ronment. • If not stated otherwise Philips devices are designed for operation in normal climatic surroundings (IEC 60601-1): - Temperature: + 10° ... + 36° C - Relative humidity: 30 ...
  • Page 9 Grounding instructions • This product must be grounded. In the unlikely event that the bike’s electrical system should malfunction or breakdown grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug.

  • Page 10: Important Operation Instructions

    Important operation instructions • Never use your bike during an electrical storm. Surges may occur in your facility power supply that could damage the bike’s compnents. • All users should have medical clearance before starting any rigorous exercise program. This is especially important for persons with a history of heart disease or other high risk factors.

  • Page 11: Application Speci Cation

    Application speci cation Medical purpose • Patient warm up before physical therapy session. • Have the patient pedal to improve range of motion after knee/hip/ankle surgery. • Allow patients to perform cardiovascular exercise. Intended patient population • There is no particular restriction on age, gender, height and nationality. •...
  • Page 12 Intended conditions of use • Environment including hygienic requirements - General: intended for indoors use. This product is not designed for use outdoors, near a pool or spa, or in any other high humidity environment. - Conditions of visibility: Ambient luminance: standard ambient room lighting is su cient. Viewing distance: 1 m Viewing angle: 120°...

  • Page 13: Operating Principle

    Operating principle The patient pushes the pedals with their feet. The operator can increase the workload using the Up and Down Key on the console. When the workload change is requested an electromagnet is energized at eld strengths relative to the workload requested. The magnetic eld generated by the coil is induced into a ywheel creating eddy currents to ow in the ywheel.

  • Page 14: Signi Cant Performance Characteristic

    Signi cant performance characteristic Please refer to “Unique uses for the 7.0 R” in Operating the 7.0 R.

  • Page 15: Intended User Pro Le

    Intended user pro le Intended operator • There is no particular restriction on age, gender, height, weight, ability and culture. • Education: University or above • Knowledge: The operator should read the User’s Manual before use. • Discipline: The operator should receive training from the manufac- turer before use.

  • Page 17: Operating The 7.0 R

    Operating the 7.0 R The recumbent bike is intended to be used in aiding in the physical rehabilitation process for patients with orthopedic and neurological problems. Also used in sports medicine, wellness and general conditioning programs. Typical applications for this type of product are: •...
  • Page 18 Other features of the 7.0 R • Work range up to 750 watts (60 RPM) when level settings are at 15 watts per level (see Setup under Console section for Level settings). • Indexed seat positioning accommodates users from 147 cm to 200 cm (4’...

  • Page 19: Features

    Features 7.0 U – Upright bike Parts and adjustments 1. Electronic console 2. Mechanical brake 3. Pedal adjustment 4. A.C. Power input 5. Seat swivel adjustment 6. Hand pulse sensors 7. Seat back angle adjustment 8. Leveling glide 9. Seat angle adjustment Optional parts (not shown) 2.1 Neurological pedal set...
  • Page 20 The 7.0 R is an easy product to set up and use, from the adjustments to the intuitive interface. This section explains how to set up, adjust and operate your 7.0 R. Leveling the 7.0 R Once the 7.0 R is assembled, and placed on a at level oor, it may be necessary to adjust the leveling glides on the bottom of the unit to ensure proper stability of the 7.0 R.
  • Page 21 Pedal adjustment Loosen the knob on the adjustable crank and pull up to disengage the pin. Slide the pedal up or down the crank arm to the desired setting then tighten the knob. There is a numbered scale for repeat- ability and a program in the Set Up function of the console that can assist in setting up the pedal position to accommodate various patient knee angles.

  • Page 22: Operation Of Your New Bike

    Operation of your new bike 7.0 R electronic console Change graphic display RPM scale for isokinetics only Program keys Dot matrix display Program keys w a t t s l Message window Function keys Change data display Power on When initially powered on the console will perform an internal self-test.
  • Page 23 The odometer will remain displayed for only a few seconds then the console will go to the start up display, also known as Idle Mode. The message window will be scrolling the start up message. You may now begin to use the 7.0 R. The console will automatically power down after 20 minutes of inac- tivity.
  • Page 24 The six knee angle options are: • R Min (Right leg minimum exion) L Min (Left leg minimum exion) • R Max (Right leg maximum exion) L Max (Left leg maximum exion) • R Max (Right leg maximum exion) L Min (Left leg minimum exion) •...
  • Page 25 The dot matrix has 24 columns of lights and each column represents 1 minute in the Quick start program (time per column can be modi ed in other programs). At the end of the 24th column (or 24 minutes of work) the display will wrap around and restart at the rst column again.
  • Page 26 • If the Stop/Reset button is pressed twice during a workout the pro- gram will end and a summary of information of the exercise session will be displayed. • If the Stop/Reset key is held down for 3 seconds the console will per- form a complete Reset.
  • Page 27 • The message window will prompt you to enter the time for the program. You may enter the time using the Up and Down keys or the numeric key pad then press the Enter key to accept and proceed to the next screen.
  • Page 28 Hill The Hill program simulates going up and down a hill. The resistance in the pedals will steadily increase and then decrease during the program. Plateau The Plateau program provides a steady state exercise with warm up and cool down periods. Interval The Interval program takes you through high levels of intensity fol- lowed by periods of low intensity.
  • Page 29 Programming preset programs • Select the desired program button then press the Enter key. • The message window will prompt you to enter the time for the program. You may enter the time using the Up and Down keys or the numeric key pad then press the Enter key to accept and proceed to the next screen.
  • Page 30 • When you press enter, the message window will show “Name – A”, if there is no name saved. If the name “Custom Workout” had been previously saved the message window will show “Name – Custom Workout” and the C in Custom will be blinking. If there is a name saved you can change it or you may press the Stop keyto keep the name and continue to the next step.
  • Page 31 • The next segment will show the same level as the previously adjust- ed segment. Repeat the same process as the last segment then press enter. Continue this process until all twenty four segments have been set. • The message window will then tell you to press enter to save the program.
  • Page 32 Workload chart for male or very t female 50-300 Stage kgm/min <90 90-105 >105 150-900 125-750 100-600 Stage kgm/min kgm/min kgm/min <120 120-135 >135 <120 120-135 >135 <120 120-135 >135 225-1350 200-1200 175-1050 200-1200 175-1050 150-900 175-1050 150-900 125-750 stage kgm/min kgm/min kgm/min...
  • Page 33 Before the test • Make sure you are in good health; check with your physician before performing any exercise if you are over the age of 35 or persons with pre-existing health conditions. • Adjust the seat to the proper position so that when your leg is extended during pedaling there is a slight bend at the knee of about 5 degrees.
  • Page 34 What the score means VO2max Chart for males and very t females 18-25 26-35 36-45 46-55 56-65 years years years years years years excellent >60 >56 >51 >45 >41 >37 good 52-60 49-56 43-51 39-45 36-41 33-37 above average 47-51 43-48 39-42 35-38 32-35 29-32 average 42-46 40-42 35-38 32-35...
  • Page 35 • Set the target Watt Level for the program then press Enter. The default setting is 50 watts. • You may turn the Auto-brake on or o then press enter to continue. • Now you are nished editing the settings and can begin your work- out by pressing theStart key.
  • Page 36 • During the program you will be able to scroll through the data in the message window by pressing the Display key. You may also switch between the speed pro le, power pro le or a quarter mile track by pressing the Display key adjacent to the dot matrix display.
  • Page 37 Biofeedback measurements and graph Below is a sample picture showing the symmetry graph. In the message window there is an average watt measurement and it is indicating that the left leg is producing more power than the right leg, 41 vs. 34 watts. The graph re ects the higher wattage of the left leg. If the power is equal in both legs only two dots would be lit on the bottom center of the graphic screen.

  • Page 38: Data Transfer Software Instructions

    Data transfer software instructions • Works with newer 7.0 T, 7.0 S, 7.5 S, 7.0 R and 7.0 U consoles with USB ports on the back • The software works with Windows 10, 7 and XP series, with .Net • Framework 2.0.
  • Page 39 Step 2. Click "Connect" or "Change" to select the connecting port (left gure). After clicking the "Change", or connecting to the wrong port, the COM port selection window pops up (right gure). Select the correct COM port and click "Connect". Selecting COM port Pop-Up COM Port Selection Window...
  • Page 40 The saved data can be found at the assigned destination. Click record button Philips Data Transfer V1.0 Philips Data Transfer V1.0 7.0 R Recording complete Philips Data Transfer V1.0...
  • Page 41 The le is saved in .CSV format, which can be opened by Microsoft Excel. Example shown below.

  • Page 42: Using A Heart Rate Transmitter

    Using a heart rate transmitter Note: The chest strap transmitter is not a standard part, but is a separate purchase. Most transmitters that operate at 5kHz frequency will also work. How to wear your wireless chest strap transmitter? • Attach the transmitter to the elastic strap using the locking parts. •...
  • Page 43 • Sweat is the best conductor to measure very minute heart beat electrical signals. However, plain water can also be used to pre-wet the electrodes (2 black square areas on the reverse side of the belt and either side of transmitter). It’s also recommended that you wear the transmitter strap a few minutes before your work out.
  • Page 44 Erratic operation Caution! Do not use this bike for Heart Rate Control unless a steady, solid Actual Heart Rate value is being displayed. High, wild, random numbers being displayed indicate a problem. Areas to look at for interference, which may cause erratic heart rate •...
  • Page 45 • You are now asked to enter your Weight. You may adjust the Weight number using the Up and Down keys or the numeric key pad, then press enter to continue. • Next is Time. You may adjust the Time and press enter to continue. •...

  • Page 46: Assembly Instructions For 7.0 R

    Assembly instructions for 7.0 R Hardware Step 1. #65- 3/8" × 2- 1/4" (4PCS) #77- 3/8" × 3/4" (8PCS) #71- 3/8" × 2" (4PCS) #84- 3/8" × 1" (4PCS) #175- 3/8" × 2-3/4" (2PCS) #205- 8.5mm × 26mm (2PCS) #208- 5/16" ×1-1/4" (1PC) #89- 3/8"...
  • Page 47 Step 2. #216- M6 × P1.0 (2PCS) #221- M6 × P1.0 × 40L (2PCS) #83- 5/16" × 3/4" (4PCS) Step 3. #136- M5 × 20L (4PCS) #220- 3/8" × 1-3/4" (2PCS) #215- 3/8" (2PCS) #206- 10mm × 25mm (2PCS)
  • Page 48 Step 4. #68- 5/16" × 5/8" (8PCS) #82- 5/16" (2PCS) #76- 5/16" × 3/4" (6PCS) #83- 5/16" × 3/4" (2PCS) #187- M4 × 5L (4PCS) #98- M6 × 15L (2PCS) Step 5. #99- M5 × 12L (8PCS) #222- M6 × 25L (4PCS)
  • Page 49 Tools #112- 12.14m/m Open wrench (1PC) #114- Phillips Head Screw Driver (1PC) #132- 14.15m/m Open wrench (1PC) #200- 5m/m L Allen Wrench (1PC)
  • Page 50 Assembly Read each step’s instructions and study the drawing carefully to become familiar with all the parts and procedures before beginning each step. Step 1. Rear stabilizer and handle bar assembly • Install the Rear Stabilizer (7) onto the Main Frame (1) with the four 3/8” x 2-1/4”...
  • Page 52 Step 2. Swivel seat release handle assembly • Install the swivel seat release handle (40) onto the mating at area of the solid round bars and secure with the two M6 x 40mm bolts (221), four curved washers (83) and two M6 nuts (216).
  • Page 53 Step 3. Seat back and cover assembly • Slide the seat back assembly (5) into the seat back angle adjustment bracket and secure with the two 3/8” x 1-3/4” bolts (220), 3/8” washers (206) and 3/8” nuts (215). • Install the seat back cover (128) onto the seat back assembly (5) by snapping into locking sockets on seat back.
  • Page 54 Step 4. Console mast, brake lever and handle bar assembly • Locate the console mast cover (31) and route the computer and hand pulse cables (266, 269, 272) and the brake lever & cable (246) through the cover. Temporarily place the cover down on the main body of the bike.
  • Page 56 Step 5. Console, seat, pedals and covers assembly • Install the front and rear stabilizer covers (32 & 37) with the four 5mm #284- 13.14m/m Open wrench (1PC) screws (99). • Install the seat cushion (61) with the four M6 x 25mm bolts (222). •...
  • Page 58 Exploded view drawing...
  • Page 59 7.0 U parts list 7.0 R parts list Item Description Main frame Console mAst Handle bar, front Seat carriage Seat back bracket Handle bar, rear Rear stabilizer Seat wheel adjustment plate (l) Seat wheel adjustment plate (r) Idler bracke Axle, seat stop Seat position latch Backing plate Aluminum track...
  • Page 60 Item Description Rear shroud (r) Cover, rear stabilizer Swivel seat frame Phillips head self-tapping screw, ø3.5x12 3/8" × 7t nut 3/8" × 2" at head socket bolt M5 × 10mm at phillips head screw 12/14mm wrench Phillips head screw driver Pedal(l) Pedal(r) Wire grommet, hgp...
  • Page 61 Item Item Description Description M5 × 30mm phillips head screw M5 × 6mm phillips head screw 3/8" nut M4 × 5mm phillipS head screw M10 × 1.25mm Nut M6 × 10mm phillips head screw M6 × 30Mm phillips head screw M6 ×...
  • Page 62 Item Item Description Description Switching power supply Brake controller Ac input module 15.9mm × 22mm powder metal bearing Scale pointer Cover Gas cylinder Swivel plate assembly Plate, mech. Brake lever Release lever, mechanical brake 800m/m_wire brake coil h Arness(red) 950m/m_wire brake coil harness(red) 1300m/m_sensor w/cable 1950m/m_computer cable 350m/m_connecting wire, Adaptor power cord...
  • Page 63 Item Description Plastic stando Ø10 × Ø25 × 0.8t(mm)_nylon washer M4 × 3.5t(mm)_nut M5_star washer M8 × P1.5 × 120l(mm)_j bolt Ø8.5 × Ø26 × 2.0t(mm)_ at washer M8 × P1.25 × 6.0t(mm)_luck nut Ø5 × Ø12 × 1.0t(mm)_ at washer Ø8 ×...

  • Page 64: Maintenance

    Maintenance • Wipe down all areas in the sweat path with a damp cloth after each use to prevent rust. • Check the pedal to make sure they are tight (monthly). • If a squeak, thump, clicking or rough feeling develops the main cause is most likely one of two reasons: - The hardware was not su ciently tightened during assembly.
  • Page 65 • Key test - Will allow you to test all the keys to make sure they are function ing. Press all the keys one at a time. • Display test - Tests all the display functions by lighting each LED light sequentially.
  • Page 66 • Sensor test - The bike has two sensors, one angle sensor for speed/velocity measurements located on the brake, and one reed switch that measures crank rotation which we use to determine crank position. - MW will show: ANGLE 0 REED 0 - When sensors operate correctly: rotate the crank and the Angle reading will show pedal RPM measurement and the Reed will change from 0 to 1 once per pedal revolution.
  • Page 67 Console programs do not start • Perform Keypad test in Maintenance mode • If you cannot access the test, and the keys seem to have no a ect when pressed, then the keypad has malfunctioned. Program starts but no data registers when bike is pedaled •...
  • Page 68 Clicking noise when pedaling • Make sure the pedal is tightened properly. It is common to have to retighten the pedal after the rst few hours use. • Make sure the adjustment knob for the pedal slide is tightened as much as possible.

  • Page 69: Speci Cations

    Speci cations 7.0 R Dimensions Patient weight capacity Length : 57” (145cm) 440 Lbs. (200 Kgs.) Width : 30” (77cm) Power Height : 51” (130cm) 90-240V ~: 50/60 Hz: 1.76–0.71A Weight Fuse rating 180.1 lbs. (81.7 kg) Replace with only 5A, 250V glass Resistance fuse.
  • Page 70 Guidance and manufacturer’s declaration – electromagnetic compatibility The 7.0 R is intended for use in the electromagnetic environment speci ed below. The customer or the user of the 7.0 R should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment –...
  • Page 71 Immunity test IEC 60601 Compliance level – Electromagnetic environment test level guidance Electrical fast +/-2 kV for power +/-2 kV for power Mains power quality should be that transient/burst supply lines supply lines of a typical commercial or hospital environment. IEC 61000-4-4 +/-1 kV for +/-1 kV for...

  • Page 72: Description Of Packaging Symbols

    Description of packaging symbols Indicates that the package is heavy and two or more people are required to lift. Package contains fragile electronic equipment. Care should be used when handling. The product inside the packaging could be easily damaged if dropped or handled without care and attention.
  • Page 73 Indicates that an object is capable of being recycled - not that the object has been recycled or will be accepted in all recycling collection systems. Top. This side up.
  • Page 74 Product warranty Dyaco Commercial & Medical North America LLC (hereinafter “Dyaco”), the manufacturer of the Philips Professional Series Physical Therapy Products (hereinafter “Products”) warrants all of the Prod- ucts and their components listed below for the periods of time set...
  • Page 75 • Proper connection to a grounded power supply of su cient voltage, replacement of blown fuses, repair of loose connections or defects in house or facility wiring. • Expenses for making the tness equipment accessible for servicing, including any item that was not part of the tness equipment at the time it was shipped from the factory.
  • Page 76 • Manufacturer, distributor, or the Licensor shall not be responsible or liable of any direct, indirect, general, special, punitive, incidental or consequential damages; loss of or damage to property; claims of third parties; loss of life; personal injury (including further injury, or re-injury), and any other losses or damages of any kind or character, arising out of or in connection with the use of Biophysical Agents by the facilities or clinicians.
  • Page 77 Service Keep your bill of sale. Twenty four (24) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as determined by the serial number establishes the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
  • Page 78 2019© Dyaco Commercial & Medical North America LLC. All right reserved. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product has been manufactured by and is sold under the responsibility of Dyaco Commercial & Medical North America LLC,...

Table of Contents