Table of Contents
Installation
CAUTION
This chapter provides installation instructions for the HP 8360
L-Series swept CW generator and its accessories. It also provides
information about initial inspection, damage claims, preparation for
use, packaging, storage, and shipment.
This product is designed for use in Installation Category II and
Pollution Degree 2 per IEC 1010 and 664, respectively.
Inspect the shipping container for damage. If the shipping container
or cushioning material is damaged, it should be kept until the
contents of the shipment have been checked for completeness and the
swept CW generator has been checked mechanically and electrically.
The contents of the shipment should agree with the items noted
on the packing slip. Procedures for checking the basic operation
of the swept CW generator are in Chapter 4, "Operator's Check
and Routine Maintenance". You will find procedures for checking
electrical performance in the "Performance Tests" chapter of your
HP 8360 B-Series Swept Signal Generator/HP 8360 L-Series Swept
CW Generator Service Guide.
If there is any electrical or mechanical defect, or if the shipment is
incomplete, notify the nearest Hewlett-Packard office. If the shipping
container is damaged, or if the cushioning material shows signs of
stress, notify the carrier as well as the Hewlett-Packard office. Keep
the shipping material for the carrier's inspection. The HP office
will arrange for repair or replacement without waiting for a claim
settlement.
Installation 3-1
Hide quick links:
Chapters
Table of Contents
