Table of Contents
List of Menus
R:recall menu
This menu recalls user settings.
Item number Category
R
recall
S:osd menu
This menu makes OSD-related settings.
Item number Category
S001
osd
S002
osd
T:status menu
These commands are used to display information
obtained from the input signal.
Item number Category
–
status
T001
status
T002
status
T003
status
Item
Arguments
recall
1 to 6
Item
Arguments
display
off
on
control
push ENTER to
enter
push MENU to
enter
Item
Arguments
all
–
ts_rate
–
pat_version
–
pat_interval
–
Function
Recalls the specified set of settings from
the six sets of user settings.
Function
Invalidates OSD output to the SDI MON
(SUPER) connector.
Validates OSD output to the SDI MON
(SUPER) connector.
For OSD operation, the arrow keys are
dedicated to the OSD for cursor
movement.
This disconnects the arrow keys from the
OSD.
Function
Displays all information from T001 to T057.
Outputs the measured value of the TS bit
rate on the ASI IN connector in asi_to_sdi/
asi_to_sdti-cp/tx-rx/tx-rx (cm) mode.
In any other mode or when there is no
input TS stream, outputs "--------" signifying
that this is invalid.
Outputs the TS stream PAT version during
selection/decoding in asi_to_sdi/
asi_to_sdti-cp/tx-rx/tx-rx (cm) mode.
In any other mode or when there is no
input TS stream, outputs "--------" signifying
that this is invalid.
If the value is not within the tolerance of
the MSB specification, "not accepted." is
appended to the output.
Permitted values: 0≤num≤31
Outputs the TS stream PAT interval
(average value over TBD seconds) during
selection/decoding, in asi_to_sdi/
asi_to_sdti-cp/tx-rx/tx-rx (cm) mode.
In any other mode or when there is no
input TS stream, outputs "--------" signifying
that this is invalid.
If the value is not within the tolerance of
the MSB specification, "not accepted." is
appended to the output.
Permitted values: 0≤num≤200
75
Table of Contents
