Page 2
Technical data __________________________________________________ 4 Declaration of conformity ________________________________________ 6 Appliance overview _____________________________________________ 8 Basic Information (General)______________________________________ 10 Basic Safety Precautions ________________________________________ 11 Transport and storage __________________________________________ 11 Unpacking, Setup and Commissioning ____________________________ 11 ILT-BA-e-0612...
Page 3
User menu ____________________________________________________ 14 Operation _____________________________________________________ 42 Data output _________________________________________________ 70 Service, maintenance, disposal _________________________________ 72 Instant help _________________________________________________ 73 ILT-BA-e-0612...
Page 4
KERN ILT 12K0.1DM ILT 30K0.2DM Readability (d) 0.1/0.2 g 0.2/0.5 g Weighing range (max) 6/12 kg 12/30 kg Minimum load 5/10 g 10/25 g Verification value 1/2 g 2/5 g Verification class Reproducibility 0.2/0.4 g 0.4/1 g Linearity ± 0.2/0.4 g ±...
Page 5
KERN ILT 60K0.5DM ILT 120K1DM Readability (d) 0.5/1 g 1/2 g Weighing range (max) 30/60 kg 60/120 kg Minimum load 25/50 g 50/100 g Verification value 5/10 g 10/20 g Verification class Reproducibility 1/2 g 2/4 g Linearity ± 1/2 g ±...
Page 39
Max mass can not exceed 11.250 g! Text Parameter No. Kern & Sohn GmbH Date: Time: Weight: *****Signature:..*** Weighing with tolerance range *** Text Parameter No. & G m b ILT-BA-e-0612...
Page 54
Display GLP parameter Data output P2 03 Printout Time 0: no P2 04 Printout Date 0: no P2 05 User printout 0: no P2 06 Proj. Printout 0: no P2 07 ID- printout 0: no P2 08 Cal. printout 0: no P2 03 Printout Time 1: yes P2 04 Printout Date 1: yes...
Page 66
Display GLP Parameters Data output P2 03 Printout Time 0: no P2 04 Printout Date 0: no P2 05 User printout 0: no P2 06 Proj. Printout 0: no P2 07 ID- printout 0: no P2 08 Cal. printout 0: no P2 03 Printout Time 1: yes P2 04 Printout Date 1: yes...
Page 69
Display GLP Parameters Data output P2 03 Printout Time 0: no P2 04 Printout Date 0: no P2 05 User printout 0: no P2 06 Proj. Printout 0: no P2 07 ID- printout 0: no P2 08 Cal. printout 0: no P2 03 Printout Time 1: yes P2 04 Printout Date 1: yes...
Page 73
Fault Possible cause The displayed weight does The balance is not switched on. not glow. The mains supply connection has been interrupted (mains cable not plugged in/faulty). Power supply interrupted. The displayed weight is Draught/air movement permanently changing Table/floor vibrations Weighing plate has contact with other objects.