Commissioning
6.6 Commissioning via local display
Pulse output - channels 2 to 4
Pulse output – channels 2 to 4
You can assign the process value, and you can set the direction, the polarity, the
redundancy mode, the pulse width, pulse width units, pulse units amount per pulse, and the
fail-safe behaviour.
Status output - channels 2 to 4
Status output – channels 3 to 4
You can configure the status mode, the polarity, on delay and off delay.
66
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC