Changing Isp Settings; H4100 And H4300 Series - HP iPAQ H4100 series User Manual
Wireless lan and hp ipaq pocket pcs
Hide thumbs
Also See for iPAQ H4100 series:
- Getting started (72 pages) ,
- User manual (143 pages) ,
- Networking manual (57 pages)
Table of Contents
Perform the following steps to change the server settings on HP iPAQ Pocket PC h5400 series
handheld devices:
1. Contact the ISP or network administrator to:
A. Determine the correct name resolution
B. Obtain the specific server IP address
C. Determine if alternate addresses are available
NOTE: An alternate address may be enabled to establish a connection in which the primary server
is unavailable.
D. Turn on the WLAN.
E. Tap the Connections icon, Settings, the Advanced tab, Network Card, and then
the Network Adapters tab.
F.
In the "My network card connects to..." drop-down box, tap either "The Internet"
(no proxy server is used) or "Work" (proxy server is used).
NOTE: If connecting to the ISP at home, then tap The Internet. If connecting to a private network
such as a corporate network at work, then tap Work.
5. In the "Tap an adapter to modify settings" box, tap "iPAQ WLAN Wireless Adapter."
6. Tap the Name Servers tab and enter the appropriate information.
Changing ISP settings
h4100 and h4300 series
To change the ISP settings on an HP iPAQ h4100 or h4300 series handheld device, perform the
following steps:
1. Tap Start, Settings, the Connections tab, the Connections icon, and then the Advanced tab.
2. In the Connections screen, tap "Select Networks" in the "Select Networks: box that
appears under the text, Networks are groups of settings used by programs to automatically
connect to an ISP or private network.
3. On the Network Management screen, tap "My Work Network" and then the "New..." box
beneath the connection.
4. Tap the "Modem" or "Proxy Settings" tabs to change ISP settings.
A. To add a new modem connection:
I.
II.
III.
IV.
V.
VI.
VII.
VIII.
B. To change an existing connection:
The Wireless LAN and HP iPAQ Pocket PCs
On the Connections screen, tap "Add a new modem connection" and
then enter a name for the connection in the "Enter a name for the
connection:" box.
Select the desired modem in the "Select a modem:" drop-down box.
Tap Next.
On the "My Connection" screen, enter the appropriate country code (1
for the U.S.), area code, and telephone number to be dialed for the
connection; tap Next.
Type the desired user name for the connection.
Type the desired password for the connection.
Type the domain, if a domain was provided by the ISP or network
administrator.
Tap "Finish."
31
- Quick Links:
- Hp Ipaq Pocket Pc Wireless Products
Hide quick links:
Table of Contents
