Changing Tcp/Ip Settings; H4100 And H4300 Series; H5400 Series With Microsoft Pocket Pc 2002; H5400 Series With Microsoft Pocket Pc 2003 Rom Upgrade - HP iPAQ H4100 series User Manual
Wireless lan and hp ipaq pocket pcs
Hide thumbs
Also See for iPAQ H4100 series:
- Getting started (72 pages) ,
- User manual (143 pages) ,
- Networking manual (57 pages)
Table of Contents
Changing TCP/IP settings
h4100 and h4300 series
NOTE: Most Internet Service Providers (ISPs) and private networks use dynamically-assigned IP
addresses. Unless the ISP or private network does not use dynamically-assigned IP addresses, the
TCP/IP settings require no change. If unsure about TCP/IP settings using dynamically-assigned IP
addresses, then contact the network administrator.
Perform the following steps to change the TCP/IP settings on an HP iPAQ Pocket PC h4100 or h4300
series handheld device:
1. If the IP address, subnet mask, and/or default gateway are not known, then contact the
system administrator.
2. Turn on the WLAN.
3. Tap the Connections icon, Settings, the Advanced tab, and then tap Network Card. On the
Configure Wireless Networks screen, tap Network Adapters. Or, on the Start screen, tap
Start, Settings, the Connection tab, and then the Connections icon; tap the Advanced tab,
Network Card, and then the Network Adapters tab. On the Configure Wireless Networks
screen, tap the Network Adapters tab.
4. Still on the Configure Wireless Networks screen, tap either The Internet (the network uses no
proxy server) or Work (network uses a proxy server) in the "My network card connects to..."
drop-down box.
NOTE: If connecting to the ISP at home, then tap The Internet. If connecting to a private
network such as a corporate network, then tap Work.
5. In the "Tap an adapter to modify settings" box, tap iPAQ WLAN Wireless Adapter.
6. Tap the IP Address tab.
7. Tap "Use specific IP address" and then enter the appropriate information.
8. Tap OK to save the settings.
h5400 series with Microsoft Pocket PC 2002
NOTE: Most Internet Service Providers (ISPs) and private networks use dynamically-assigned IP
addresses. Unless the ISP or private network does not use dynamically-assigned IP addresses, the
TCP/IP settings require no change. If unsure whether the TCP/IP settings use dynamically-assigned
IP addresses then contact the network administrator.
Perform the following steps to change the TCP/IP settings on the HP iPAQ Pocket PC h5400 series
with Microsoft Pocket PC 2002 handheld device:
1. Turn on the WLAN.
2. On the Start screen, tap Start, Settings, the Connection tab, and then the Connection icon.
3. On the Connections screen, tap the connection for which the IP address is desired.
4. Tap the "Modify..." box beneath the connection.
5. On the Internet Settings screen, tap the connection name and then tap "Advanced..."
6. On the "Advanced..." screen, tap the TCP/IP tab.
h5400 series with Microsoft Pocket PC 2003 ROM upgrade
NOTE: Most Internet Service Providers (ISPs) and private networks use dynamically-assigned IP
addresses. Unless the ISP or private network does not use dynamically-assigned IP addresses, the
The Wireless LAN and HP iPAQ Pocket PCs
27
- Quick Links:
- Hp Ipaq Pocket Pc Wireless Products
Hide quick links:
Table of Contents
