Quick Links
JY997D29701A
FX
-
MT/D
3UC
SUPPLEMENTARY MANUAL
Manual Number
JY997D29701
Revision
A
Date
September 2007
This manual supplements the contents of the FX
3UC
(D,DSS) Series Hardware
Manual (Manual Number: JY997D28601A). For details, refer to FX
3UC
USER'S MANUAL - Hardware Edition (Manual number: JY997D28701). Before
use, read this manual and the manuals of all relevant products fully to acquire
proficiency in handling and operating the product. Make sure to learn all the
product information, safety information, and precautions.
Store this manual in a safe place so that it can be taken out and read whenever
necessary. Always forward it to the end user.
Registration:
The company and product names described in this manual are registered
trademarks or the trademarks of their respective companies.
Effective September 2007
Specifications are subject to change without notice.
©
2007 Mitsubishi Electric Corporation
Safety Precaution
(Read these precautions before use.)
This manual classifies the safety precautions into two categories:
and
.
Indicates that incorrect handling may cause hazardous
conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous
conditions, resulting in medium or slight personal injury
or physical damage.
Depending on the circumstances, procedures indicated by
also cause severe injury.
It is important to follow all precautions for personal safety.
Associated Manuals
Manual name
Manual No.
Description
Extractions of descriptions of input/output
specifications, wiring and installation of
FX
3UC
-
MT/D, FX
3UC
-
FX
(D,DSS)
3UC
from FX
S eries User's Manual -
3U C
Series
JY997D28601
Hardware Edition.
Hardware Manual
For the detailed explanation, refer to the
FX
Series User's Manual - Hardware
3UC
Edition.
FX
Series
JY997D28701
E x p l a i n s t h e F X
S e r i e s P L C
3UC
3 U C
User's Manual
MODEL CODE:
specifications for I/O, wiring, installation,
- Hardware Edition
09R519
and maintenance.
How to obtain manuals
For product manuals or documents, consult with the Mitsubishi Electric dealer
from where you purchase your product.
DESIGN
PRECAUTIONS
• Make sure to have the following safety circuits outside of the PLC to ensure safe
system operation even during extension power supply unit or PLC
failure.Otherwise,malfunctions may cause serious accidents.
1) Most importantly, have the following: an emergency stop circuit, a
protection circuit, an interlock circuit for opposite movements (such as
normal vs. reverse rotation), and an interlock circuit (to prevent damage to
the equipment at the upper and lower positioning limits).
DESIGN
PRECAUTIONS
2) Note that when the PLC CPU detects an error, such as a watchdog timer error,
during self-diagnosis, all outputs are turned off. Also, when an error that cannot
be detected by the PLC CPU occurs in an input/output control block, output
control may be disabled.
External circuits and mechanisms should be designed to ensure safe
machinery operation in such a case.
3) Note that when an error occurs in a relay, triac or transistor output device, the
output could be held either on or off.
For output signals that may lead to serious accidents, external circuits and
mechanisms should be designed to ensure safe machinery operation in such a
case.
1. Introduction
This manual supplements the contents of the FX
3UC
SERIES
(Manual Number: JY997D28601A). This manual covers basic hardware details for the
following FX
Series Extension Block. For details, refer to FX
2NC
MANUAL - Hardware Edition (Manual number: JY997D28701).
INPUT
OUTPUT
MODEL
QTY
TYPE
QTY
DEVICE
FX
-16EX
16
-
2NC
24V DC
Sink
FX
-32EX
32
-
2NC
FX
-16EYT
-
-
16
Transistor
2NC
FX
-32EYT
-
-
32
Transistor
2NC
24V DC
FX
-16EX-T
16
-
2NC
Sink
FX
2NC
-16EYR-T
-
-
16
Relay
2. Specifications
2.1 General Specifications
The general specifications are equivalent to the PLC main unit. For the general
specifications, refer to the FX
3UC
(D,DSS) Series Hardware Manual.
2.2 Input Specifications
may
FX
-16EX,FX
2NC
Input voltage
24V DC +20%, -15%
Input current
24V DC, 5mA
OFF
ON
Input
switching current
ON
OFF
Response time
MT/DSS
Circuit isolation
Photocoupler
Operation indication
2.3 Output Specifications
2.3.1
Transistor Output Specifications
FX
-16EYT, FX
2NC
Switched voltage (resistive load) 5 - 30V DC
0.1A/1point
Rated current / N points
Make sure that the total load current of the 8
resistance load points is 0.8 A or less.
Max. Inductive load
2.4W/24V DC
OFF
ON
<0.2ms (100mA/24V DC),
Response
time (approx.)
ON
OFF
<0.2ms (100mA/24V DC),
Open circuit current leakage
0.1mA/30V DC
Circuit isolation
Photocoupler
Operation indication
LED is lit when photocoupler is driven
2.3.2
Relay Output Specifications
Switched voltage (resistive load)
Rated current / N points
Max. Inductive load
Minimum load
(D,DSS) Series Hardware Manual
OFF
Response time
SERIES USER'S
3UC
(approx.)
ON
OFF
Circuit isolation
MASS
Kg (lbs)
Operation indication
TYPE
-
-
0.15(0.33)
*1 For the product life of relay contacts, refer to the FX
Hardware Edition.
-
-
0.2(0.44)
2.4 External Dimensions
Sink
0.15(0.33)
2.4.1
FX
-16EX, FX
2NC
2NC
Sink
0.2(0.44)
FX
-32E
2NC
26.2(1.03)
-
-
0.15(0.33)
FX
-16E
2NC
14.6(0.57)
-
0.2(0.44)
-32EX,FX
-16EX-T
2NC
2NC
>3.5mA
<1.5mA
10ms
LED is lit
-32EYT
2NC
2.4.2
FX
-16EYR-T
2NC
≤ 240V AC, ≤ 30V DC
(250V AC or less when the unit does not
comply with CE, UL or cUL standards)
2A/1point
If one COM is used, make sure that the total
load current of the 8 resistance load points is 4
A or less.
When connecting two COM (number) terminals
externally, the total load current for 8 resistance
load points is 8A.
80VA*1
When supply voltage < 24V DC allow at least
5mA flow
ON
10ms
10ms
by relay
LED is lit when coil is energized
3UC
Series User's Manual -
-32EX, FX
-16EYT, FX
-32EYT
2NC
2NC
2.5 Terminal Layouts
FX
2NC
X0
X1
X2
X3
X4
X5
X6
X7
COM COM
DIN Rail: 35mm
(1.38)
Power supply connectors for
FX
input extension blocks
2NC
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
COM1 COM1
FX
-16EX-T, FX
-16EYR-T
2NC
2NC
FX
-16EYR-T
2NC
24.2(0.95)
FX
-16EX-T
2NC
20.2(0.80)
DIN Rail: 35mm
(1.38)
-16EX
FX
-32EX
FX
-16EX-T
2NC
2NC
IN
IN
IN
IN
X0
X0
X0
X0
X0
X0
X1
X1
X1
X1
X1
X1
X2
X2
X2
X2
X2
X2
X3
X3
X3
X3
X3
X3
X4
X4
X4
X4
X4
X4
X5
X5
X5
X5
X5
X5
X6
X6
X6
X6
X6
X6
X7
X7
X7
X7
X7
X7
COM COM
COM COM
COM
COM
X0
X1
X2
X3
X4
X5
X6
X7
COM
COM
-16EYT
FX
-32EYT
FX
-16EYR-T
2NC
2NC
OUT
OUT
OUT
OUT
Y0
Y0
Y0
Y0
Y0
Y0
Y1
Y1
Y1
Y1
Y1
Y1
Y2
Y2
Y2
Y2
Y2
Y2
Y3
Y3
Y3
Y3
Y3
Y3
Y4
Y4
Y4
Y4
Y4
Y4
Y5
Y5
Y5
Y5
Y5
Y5
Y6
Y6
Y6
Y6
Y6
Y6
Y7
Y7
Y7
Y7
Y7
Y7
COM1 COM1
COM2 COM2
COM1
COM1
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
COM2
COM2
Related Manuals for Mitsubishi FX2NC-16EX
Summary of Contents for Mitsubishi FX2NC-16EX
- Page 1 COM1 Switched voltage (resistive load) 5 - 30V DC COM1 How to obtain manuals For product manuals or documents, consult with the Mitsubishi Electric dealer 0.1A/1point from where you purchase your product. Rated current / N points Make sure that the total load current of the 8 resistance load points is 0.8 A or less.
- Page 2 Series User's Manual - Hardware Edition. DC power supply Warranty Mitsubishi will not be held liable for damage caused by factors found not to be Emergency stop the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the Fuse Mitsubishi products;...