Windows 2000 Microsoft and Windows are registered trademarks of Table of Contents Microsoft Corporation. Other company names and product names mentioned in this guide are also trademarks and registered trademarks. Configuring the Printer .........3 [Main] tab Settings ..........4 [Density Adjust] tab Settings ......5 [Message] tab settings .........6 Message list .............7...
The screens used to describe setup in this guide assume Configuring the Printer that the UP-D711MD printer is used in a Windows 7 environment. For further details on settings, refer to the operating instructions for the printer in combination You can open the UP-D711MD settings screen and with this manual.
Enlarge to Paper [Main] tab Settings If the image size is smaller than the paper size, the image This tab is used to make basic printing settings. is enlarged automatically to fit the paper size. To change the interpolation method, select a [Interpolation Method] setting below.
(Example 2) Value is set to 3, printing six pages: About • When not resetting Displays information about the driver version. long margin Restore Defaults Pressing the [Main] tab restores all settings to their default values. [Density Adjust] tab Settings The circled numbers mean counter.
You can boxes. adjust the gradation to one of 65 values. The standard Message dialog boxes appear when the UP-D711MD value is 0. The adjustable range is -32 to +32. error occurs, for example.
Test Message list Verify the position in which message dialog boxes appear on the display or screen. A test dialog box will Displayable messages are as follows. Fix any issues, appear in the position defined with the [Horizontal] and following the messages below. For further details on [Vertical] settings.