Call Forward Settings - Cisco ATA 191 Administration Manual
Analog telephone adapter guide for multiplatform firmware
Hide thumbs
Also See for ATA 191:
- Administration manual (72 pages) ,
- User manual (40 pages) ,
- Quick start manual (13 pages)
Table of Contents
Voice Settings Configuration
Call Forward Settings
Table 59: Call Forward Settings
Field
Cfwd All Dest
Cfwd Busy Dest
Cfwd No Ans Dest
Cfwd No Ans Delay
Selective Call Forward Settings
Table 60: Selective Call Forward Settings
Field
Cfwd Sel1-8 Caller
Cfwd Sel1-8 Dest
Description
Forward number for Call Forward All Service.
Default setting: blank
Forward number for Call Forward Busy Service. Same as Cfwd All
Dest.
Default setting: blank
Forward number for Call Forward No Answer Service. Same as Cfwd
All Dest.
Default setting: blank
Delay in sec before Call Forward No Answer triggers.
Default setting: 20
Description
Caller number pattern to trigger Call Forward Selective service. When
the caller's phone number matches the entry, the call is forwarded to
the corresponding Cfwd Selective Destination (Cfwd Sel1-8 Dest).
Example: 1408*, 1512???1234
In the above example, a call is forwarded to the corresponding
destination if the caller ID either starts with 1408 or is an 11-digit
numbering starting with 1512 and ending with 1234.
Default setting: blank
The destination for the corresponding Call Forward Selective caller
pattern (Cfwd Sel1-8 Caller).
Default setting: blank
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
• • Use ? to match any single digit.
• • Use * to match any number of digits.
Call Forward Settings
89
Hide quick links:
Table of Contents
