Distinctive Ring Settings - Cisco ATA 191 Administration Manual
Analog telephone adapter guide for multiplatform firmware
Hide thumbs
Also See for ATA 191:
- Administration manual (72 pages) ,
- User manual (40 pages) ,
- Quick start manual (13 pages)
Table of Contents
Distinctive Ring Settings
Field
Media Loopback Mode
Media Loopback Type
CONFCID Setting
Distinctive Ring Settings
Table 63: Distinctive Ring Parameters
Field
Ring1 - 8 Caller
Ring Settings
Table 64: Ring Parameters
Field
Default Ring
Default CWT
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
92
Description
The loopback mode to assume locally when making call to request
media loopback. Choices are: Source and Mirror.
Default setting: source
If the ATA answers the call, the mode is determined by the
Note
caller.
The loopback type to use when making call to request media loopback
operation. Choices are Media and Packet.
Default setting: media
Note that if the ATA answers the call, then the loopback type is
determined by the caller (the ATA always picks the first loopback type
in the offer if it contains multiple type)
Enables or disables the CONFCID.
Default setting: yes
Description
Caller number pattern to play Distinctive Ring/CWT 1, 2, 3, 4, 5, 6, 7,
or 8. Caller number patterns are matched from Ring 1 to Ring 8. The
first match (not the closest match) will be used for alerting the
subscriber. The distinctive rings are set on the Regional page. See
Regional, on page
54.
Default setting: blank
Description
Default ringing pattern, 1–8, for all callers.
Default setting: 1
Default CWT pattern, 1–8, for all callers.
Default setting: 1
Voice Settings Configuration
Hide quick links:
Table of Contents
