Hard drive (HDD)
Description
Hard drive
1 TB 7200 RPM SATA RAW 9.5 mm
2 TB 5400 RPM SATA RAW 7 MM 2.5 IN
Hard drive dummy
Hard drive cable connector
Hard drive brackets
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the base enclosure (see
Remove the hard drive:
1.
Release the HDD cable (1) from the system board.
2.
Lift the hard drive release tab (2)
3.
Lift the drive (3) to remove it.
38
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Base enclosure on page
35).
Spare part number
766644-001
912487-850
L24367-001
929450-001
929561-001