Table of Contents
Protocol
Page 4
Dialing Method
PIN Dialing
Delay
Service Provider Number
PIN Number
Outside Line
Manual Dialing
Page 5 — This page is available only if the LAN option is activated.
Cardiograph Device Name
2060026-001C
Field
MAC™ 800
Comment
Determines the protocol to use to
communicate with the device. Options are:
• A5
• CSI
• DCP
Select CSI or DCP for MUSE connections and
A5 for CardioSoft connections.
Determines whether the system uses a tone
or pulse to dial.
Identifies whether a personal identification
number (PIN) is required to dial out. If
this field is checked, you must complete
the following three fields (Delay, Service
Provider Number, PIN Number).
Determines how long, in seconds, the system
should pause between dialing the Service
Provider Number and the PIN Number and
between dialing the PIN Number and the
Outside Line.
Identifies the service provider's access
telephone number.
Identifies the personal identification number
to enter.
Identifies any access numbers that must be
dialed to reach an outside line.
Determines whether the system
automatically dials. If this field is checked,
the connection must be made manually. If
this field is cleared, the system automatically
dials and you must complete the following
fields:
• Dialing Method
• Dialtone Required
• PIN Dialing
Identifies the name of the device on the
network. By default, the value is set to
GE_. A valid network
device name contains between 1 and 20
alphanumeric and underscore characters.
The first character must be a letter.
This field is available only if a LAN option was
activated.
System Configuration
103
Table of Contents
