HP RDX USB 3.0
Removable Disk Backup System
External drive
Start Here
Commencez ici
Starten Sie hier
IMPORTANT INFORMATION ABOUT
YOUR NEW DRIVE
• The drive can be oriented horizontally or vertically.
• Select a flat, sturdy, level location for the HP RDX Removable Disk
Backup System that is close to the host server.
• Connect to a USB 3.0 port (on a computer running Windows®).
USB 2.0 is supported, but performance will be degraded.
• For optimum performance use HP-branded RDX Removable Disk
cartridges.
• Although RDX Removable Disk cartridges are ruggedly built, they
must be handled with care to ensure data integrity and long life.
• To ensure correct operation of the eject function, install the HP RDX
Utility. This utility also allows you to download and install firmware
upgrades. The utility and firmware upgrades are available from
www.hp.com/support/rdx.
1
Installation overview
IMPORTANT: For detailed, step-by-step installation
instructions, refer to the user guide found at
www.hp.com/support/rdx.
For important safety, environmental, and regulatory
information, see Safety and Compliance Information for
Server, Storage, Power, Networking, and Rack Products,
available at www.hp.com/support/Safety-Compliance-
EnterpriseProducts.
For optimum performance the drive should be
connected to a USB 3.0 port. The drive is
backward compatible with
USB 2.0, but performance
will be degraded. Do not
connect the drive to a
USB 1.1 port.
The supplied power cord
is appropriate for your
geographical region. Use it to
connect to the mains power
supply. (The drive is not
powered from the USB bus.)