Headsets
Displaying the analog headset as the default allows users to enable wideband for the analog headset.
USB Headsets
Wired and wireless USB headsets are supported. You can connect a USB headset (or the base station for a
wireless headset) to either the back USB port (if your phone has this port) or to the side USB port.
Enable a USB Headset
You must enable the applicable USB port (either the back USB or the side USB port) in Cisco Unified
Communications Manager Administration. Also, for the Enable/Disable USB Classes parameter in Cisco
Unified Communications Manager Administration, ensure that Audio Class is selected.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Select the desired phone.
Step 3
Navigate to the Phone Configuration window, and select Override Common Settings.
Step 4
Click Save.
Step 5
Click Apply Config.
Step 6
Restart your phone.
Disable a USB Headset
To disable your USB headset, you disable the USB port on your phone. Another way is to select a different
headset in the Accessories window on the phone.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Select the desired phone.
Step 3
In the Phone Configuration window, uncheck Override Common Settings.
Step 4
Click Save.
Step 5
Click Apply Config.
Step 6
Restart your phone.
Wireless Headsets
Your Cisco IP Phone 7800 Series phones support wireless headsets. For a list of supported wireless headsets,
see
http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
86