Printing Hanging and Horizontal Banners (Large-Format Printing)
A drapery or banner up to 18.0m can be made by enlarging or reducing original documents made on
application software.
However, there are cases in which an 18.0 meter banner cannot be printed because the application
software used has limits on the document size that can be set.
The procedure for printing hanging and horizontal banners is as follows:
1. Register custom paper size
From Paper Size, use Manage Custom Sizes... to
2. Select the paper size
In the
Print
dialog, select a registered custom paper size from the Paper Size list.
3. Select Page Processing from the pop-up menu
4. Select roll paper width
Set Roll Paper Width to the width of the roll paper loaded in the printer.
5. Selecting On (Bordered) or On (Borderless) for Fit Roll Paper Width
Important
• When using the customer paper size and printing the whole sheet without edges, create a paper
size with the Non-Printable Area values all set to 0mm in Manage Custom Sizes... from Paper
Size, and select On (Bordered) from the Fit Roll Paper Width in Page Processing.
register the paper size
592
that you want to use.
- Quick Links:
- Online Manual
- List of Support Code for Error
Hide quick links:
Troubleshooting
