Brother HL-L2395DW Online User's Manual page 322
Hide thumbs
Also See for HL-L2395DW:
- Service manual (340 pages) ,
- Reference manual (27 pages) ,
- Product safety manual (26 pages)
Table of Contents
If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press OK.
•
If you selected the [Shared Key] option, enter the WEP key, and then press OK.
•
If you selected the [WPA/WPA2-PSK] option, press a or b to select the Encryption Type [TKIP + AES]
or [AES], and then press OK.
™
Enter the WPA
Your Brother machine supports the use of the first WEP key only.
12. To apply the settings, select [Yes]. To cancel, select [No].
13. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
page on the Brother Solutions Center at support.brother.com.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/
MFC-L2771DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and write down the current wireless network settings.
Network Name (SSID)
Communication Mode
Infrastructure
For example:
Network Name (SSID)
HELLO
Communication Mode
Infrastructure
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press
[Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Switch Network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. Press a or b to display [
SSID>]. Press [], and then press [OK].
5. Enter the SSID name, and then press [OK].
6. Press [Infrastructure] when instructed.
key, and then press OK.
Authentication Method
Open System
Shared Key
WPA/WPA2-PSK
Authentication Method
WPA2-PSK
Encryption Mode
NONE
WEP
WEP
AES
TKIP
Encryption Mode
AES
Network Key
-
Network Key
12345678
315
- Quick Links:
- Control Panel Overview
Hide quick links:
Table of Contents
