Replacing The Staple Cartridge In The Saddle Stitcher Unit - Canon CLC5151 Reference Manual
Hide thumbs
Also See for CLC5151:
- Sending and facsimile manual (476 pages) ,
- Copying and mail box manual (468 pages)
Table of Contents
Replacing the Staple Cartridge in the Saddle Stitcher Unit
When the saddle stitcher unit of the optional Saddle Finisher-W2 is almost out of staples, and
the staple cartridge must be replaced, a screen similar to the one shown below appears on the
touch panel display. Follow the procedure described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.
IMPORTANT
If necessary, remove all of the output paper in the Booklet Tray before replacing the staple cartridge in
the saddle stitcher unit.
NOTE
• This procedure is necessary only if the optional Saddle Finisher-W2 is attached.
7
• We recommend that you order staple cartridges from your local authorized Canon dealer before your
stock runs out.
1
7-26
Finisher-W1/Saddle Finisher-W2/Puncher Unit-AG1 (Optional)
Open the front cover of the finisher.
- Quick Links:
- Troubleshooting
Hide quick links:
Table of Contents
