Quick Adjustment; Full Adjustment - Canon CLC5151 Reference Manual
Hide thumbs
Also See for CLC5151:
- Sending and facsimile manual (476 pages) ,
- Copying and mail box manual (468 pages)
Table of Contents
IMPORTANT
It is recommended that you select [Full Adjust] when performing an automatic gradation adjustment.
Select [Quick Adjust] for a quick, but less complete adjustment between regular full adjustment
recalibrations.
NOTE
[Auto Gradation Adjustment] is displayed only if the optional Color Image Reader-E1 or Color Image
Reader-F1 is attached.
Quick Adjustment
1
Press
2
Select the paper type
IMPORTANT
This machine adjusts the toner and print speed according to the paper type. To make effective
adjustments, select the correct paper type.
3
Press [Start].
Full Adjustment
IMPORTANT
• Make sure that you place the test prints properly. Accurate recalibrations of the gradation, density, and
colour settings of the machine cannot be made if the test prints are not scanned correctly.
• Three test prints are output by the machine during this adjustment. Make sure that a sufficient supply of
A3 or A4 paper is loaded into the machine before starting this procedure.
NOTE
Test prints are not counted as part of the copy or print total page counts.
1
Press
2
Select the paper type
[Adjustment/Cleaning]
press [Quick Adjust].
[Adjustment/Cleaning]
press [Full Adjust].
[Auto Gradation Adjustment].
[Auto Gradation Adjustment].
Adjusting the Machine
4
4-69
- Quick Links:
- Troubleshooting
Hide quick links:
Table of Contents
