Msdp; Originating-Rp - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
msdp
Syntax
msdp [ vpn-instance vpn-instance-name ]
undo msdp [ vpn-instance vpn-instance-name ]
View
System view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. If you do not specify this option, the command applies to the public network.
Description
Use msdp to enable MSDP on the public network or the specified VPN instance and enter public network
MSDP view or VPN instance MSDP view.
Use undo msdp to disable MSDP on the public network or the specified VPN instance and remove the
configurations in public network MSDP view or VPN instance MSDP view to free the resources that MSDP
occupies.
By default, MSDP is disabled.
You must enable IP multicast in the related instance before you use this command.
Related commands: multicast routing-enable.
Examples
# Enable IP multicast routing on the public network, and enable MSDP on the public network to enter
public network MSDP view.
[Sysname] multicast routing-enable
[Sysname] msdp
[Sysname-msdp]
# Enable IP multicast routing and MSDP in VPN instance mvpn to enter MSDP view of VPN instance
mvpn.
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] route-distinguisher 100:1
[Sysname-vpn-instance-mvpn] multicast routing-enable
[Sysname-vpn-instance-mvpn] quit
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn]
originating-rp
Syntax
originating-rp interface-type interface-number
186
Table of Contents
