Bidir-Pim Enable (Pim View); Bsm-Fragment Enable (Pim View) - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
bidir-pim enable (PIM view)
Syntax
bidir-pim enable
undo bidir-pim enable
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
None
Description
Use bidir-pim enable to enable BIDIR-PIM.
Use undo bidir-pim enable to disable BIDIR-PIM.
By default, BIDIR-PIM is disabled.
This command is effective only after multicast routing is enabled.
Related commands: pim and multicast routing-enable.
Examples
# Enable multicast routing in the public network, enter PIM view, and enable BIDIR-PIM.
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname-pim] bidir-pim enable
# Enable multicast routing in VPN instance mvpn, enter VPN instance PIM view, and enable BIDIR-PIM.
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] route-distinguisher 100:1
[Sysname-vpn-instance-mvpn] multicast routing-enable
[Sysname-vpn-instance-mvpn] quit
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] bidir-pim enable
bsm-fragment enable (PIM view)
Syntax
bsm-fragment enable
undo bsm-fragment enable
View
Public network PIM view, VPN instance PIM view
114
Table of Contents
