HP 5920 Series Command Reference Manual page 132
Hide thumbs
Also See for 5920 Series:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an NP_Port by its type and number. The NP_Port can
be an FC interface, a VFC interface, or an FC aggregate interface. If you do not specify an NP_Port, this
command displays the login information of all NP_Ports.
Usage guidelines
Only NPV switches support this command.
This command displays the login information sent by operational NP_Ports to the FCF switch and
management addresses obtained from the FCF switch.
This command displays the information for only NP_Ports that have successfully registered with the FCF
switch.
Examples
# Display the login information of all NP_Ports.
NP port: FC1/0/5
Port-WWN: 20:00:00:41:22:a8:00:05
FC4-types(FC4_features): NPV
Symbolic-node-name: NPV-Sysname
Symbolic-port-name: NPV-Sysname:FC1/0/5
Node-IP-addr: 192.168.0.153
Peer management address: snmp://192.168.0.151
NP port: Vfc2
Port-WWN: 20:00:00:49:c9:28:c7:01
FC4-types(FC4_features): NPV
Symbolic-node-name: NPV-Sysname
Symbolic-port-name: NPV-Sysname:Vfc2
Node-IP-addr: 192.168.0.153
Peer management address: snmp://192.168.0.151
Table 37 Command output
Field
FC4-types(FC4 features)
Symbolic-node-name
Symbolic-port-name
Node-IP-addr
snmp://192.168.0.152
snmp://192.168.0.152
Description
An NP_Port always registers NPV as its FC4 type and has no FC4 feature.
Symbolic name in the form of system-name, which is used for describing the
NPV switch where the NP_Port resides.
Symbolic name in the form of system-name:port-name, which is used for
describing the NP_Port.
IP address of the NPV switch.
126
Table of Contents
