Adapting The Busbar Adapter To The Busbar System; Connecting The Adapters For Mounting Reversing Contactor Assemblies - Siemens SIRIUS Manual
Industrial controls
Hide thumbs
Also See for SIRIUS:
- System manual (425 pages) ,
- Configuration manual (98 pages) ,
- Original operating instructions (20 pages)
Table of Contents
Mounting
7.3 Assembly and disassembly with different mounting systems
Busbar adapters and device holders can be connected without tools. Link wedges simply
need to be plugged in on the rear of the adapters.
Figure 7-35
The link wedges are included in the assembly kit for reversing operation, or they can be
ordered separately as accessories.
Adapting the busbar adapter to the busbar system
Hazardous voltage!
Will cause death or serious injury.
Turn off and lock out all power supplying this device before working on this device.
The busbar adapter and the device holder can be adjusted to suit the following busbar
thicknesses:
● 5 mm (delivery condition)
● 10 mm
94
Connecting the adapters for mounting reversing contactor assemblies
DANGER
SIRIUS - SIRIUS 3RA load feeders
Manual, 09/2016, A5E03656507520A/RS-AB/003
- Quick Links:
- Installation Guidelines
Hide quick links:
Table of Contents
