Mounting Direct-On-Line Starters And Reversing Starters On Din Rail Adapters (Size S2) - Siemens SIRIUS Manual
Industrial controls
Hide thumbs
Also See for SIRIUS:
- System manual (425 pages) ,
- Configuration manual (98 pages) ,
- Original operating instructions (20 pages)
Table of Contents
7.3.2.2
Mounting direct-on-line starters and reversing starters on DIN rail adapters (size S2)
Mounting the DIN rail adapter on the DIN rail
The DIN rail adapter snaps onto the DIN rail (no tools are required).
Mounting the direct-on-line starter on the DIN rail adapter: Size S2
The figure below illustrates how the size S2 direct-on-line starter with screw-type connection
system is mounted on a DIN rail adapter. The devices are snapped onto the DIN rail adapter
and screwed onto the adapter.
①
②
Note
For vibration and shock requirements, the washer must be replaced with a wedge lock
washer (DIN 50021-SS 4.4 x 9.0 x 1.7).
SIRIUS - SIRIUS 3RA load feeders
Manual, 09/2016, A5E03656507520A/RS-AB/003
Place the feeder on the DIN rail adapter.
Screw the feeder to the DIN rail adapter. The feeder sits tight on the adapter.
Tightening torque: 1.5 ... 1.6 Nm
7.3 Assembly and disassembly with different mounting systems
Mounting
77
- Quick Links:
- Installation Guidelines
Hide quick links:
Table of Contents
