Oam Loopback - HP A3100-8 v2 SI Command Reference Manual

undo oam errored-symbol threshold

View

System view

Default level

2: System level

Parameters

threshold-value: Errored symbol event triggering threshold, ranging from 0 to 4,294,967,295.

Description

Use the oam errored-symbol threshold command to set the errored symbol event triggering threshold.

Use the undo oam errored-symbol threshold command to restore the default.

By default, the errored symbol event triggering threshold is 1.

Related commands: oam errored-symbol period, display oam link-event, and display oam

configuration.

Examples

# Set the errored symbol event triggering threshold to 100.

[Sysname] oam errored-symbol threshold 100

Syntax

oam loopback

undo oam loopback

View

Ethernet port view

Default level

2: System level

Parameters

None

Description

Use the oam loopback command to enable Ethernet OAM remote loopback on the Ethernet port.

Use the undo oam loopback command to disable Ethernet OAM remote loopback on the Ethernet port.

By default, Ethernet OAM remote loopback is disabled on an Ethernet port.

Ethernet OAM remote loopback is available only after the Ethernet OAM connection is established and

can be performed only by the Ethernet OAM entities operating in active Ethernet OAM mode.

Related commands: oam enable, oam enable interface, and oam mode.

Examples

# Configure the active Ethernet OAM mode, enable Ethernet OAM, and enable Ethernet OAM remote

loopback on Ethernet 1/0/1.

15