Changing The Boot Order Of The Virtual Disks - Dell PowerEdge User Manual

Physical disk Count

Virtual Disk Count

UEFI Driver Version

Firmware Build Time

Figure 3. View Controller Information Screen

Set Bootable Device allows you to change the boot order of the virtual disks.

1

Enter the Dell PERC S140 Configuration Utility. See

2

Click Controller Management > Change Controller Properties.

3

Click Set Bootable Device.

A Change Order dialog box displays the list of virtual disks available.

4

Use the arrow keys to set a virtual disk and + or – to change the order of the virtual disks that need to be booted first.

5

Click Ok.

The changes to the boot order of the virtual disks are displayed.

Displays the total number of physical disks available on the system

Displays the total number of virtual disks available

Displays the UEFI driver version installed on the system

Displays the time and date the firmware was last updated.

Entering the DELL PERC S140 Configuration

Utility.

UEFI RAID configuration utility

29