Dhcp Test Configuration Example - HP A3100-8 v2 EI Configuration Manual
A3100 v2 switch series
Hide thumbs
Also See for A3100-8 v2 EI:
- Installation manual (58 pages) ,
- Configuration manual (193 pages) ,
- Command reference manual (49 pages)
Table of Contents
[DeviceA] display nqa history admin test
NQA entry (admin admin, tag test) history record(s):
Index
370
369
368
367
366
365
364
363
362
361
DHCP Test configuration example
Network requirements
As shown in
address from the DHCP server (Device B).
Figure 7 Network diagram for DHCP test
Configuration procedure
# Create a DHCP test group, and specify interface VLAN-interface 2 to perform NQA DHCP tests.
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type dhcp
[DeviceA-nqa-admin-test-dhcp] operation interface vlan-interface 2
# Enable the saving of history records.
[DeviceA-nqa-admin-test-dhcp] history-record enable
[DeviceA-nqa-admin-test-dhcp] quit
# Start DHCP tests.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Stop DHCP tests after a period of time.
[DeviceA] undo nqa schedule admin test
# Display the result of the last DHCP test.
[DeviceA] display nqa result admin test
NQA entry (admin admin, tag test) test results:
Send operation times: 1
Min/Max/Average round trip time: 624/624/624
Square-Sum of round trip time: 389376
Last succeeded probe time: 2007-11-22 09:56:03.2
Response
Status
3
Succeeded
3
Succeeded
3
Succeeded
5
Succeeded
3
Succeeded
3
Succeeded
3
Succeeded
2
Succeeded
3
Succeeded
2
Succeeded
Figure
7, configure NQA DHCP tests to test the time required for Device A to obtain an IP
Time
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.1
2007-08-23 15:00:01.1
2007-08-23 15:00:01.1
2007-08-23 15:00:01.1
Receive response times: 1
32
Hide quick links:
Table of Contents
