Step 2: Verify Operation - Emerson Rosemount 648 Quick Installation Manual

Rosemount 648 Wireless

S

1

TEP

CONTINUED

6. Close the housing cover and tighten to safety specification. Always ensure a proper seal

by installing the electronics housing covers so that metal touches metal, but do not over

tighten.

7. Position the antenna such that it is vertical, either straight up or straight down.The

antenna should be approximately three feet (0,91 m) from any large structures or

buildings to allow clear communication to other devices.

S

2: V

TEP

ERIFY

Operation can be verified in four locations: at the device via the LCD, by using the Field

Communicator, at the Gateway via the Smart Wireless Gateway's integrated web server, or

™

via AMS

Suite: Intelligent Device Manager.

Local Display

During normal operation, the LCD should display the PV value at the update rate up to 1

minute intervals. Refer to the Rosemount 648 Manual for error codes and other LCD

messages. Press the Diagnostic button to display the TAG, Device ID, Network ID,

Network Join Status and Device Status screens.

6

...

O

PERATION

Quick Installation Guide

00825-0100-4648, Rev CC

February 2012