Mode4 (Mode For Setting Of Each Parameter For Optional Function) - Panasonic KW1M-H User Manual

Auto-off setting mode

Display LCD turns off automatically when there is no key operation for a long time.

・Off time can be set the range of 0 to 99min.

'0' should be set if you want to turn always light on.

'1~99' should be set if you want to turn light off at setting time.

・After turns off the LCD, any key operation makes it turns on.

・After turns off the LCD, only power indicator turns on.

Version check mode

Mode to check version of the software.

It displays version of the software.

Saved file type selection mode

Mode defines file types to write to SD memory card.

・Select ON and press for each type 1, 2 and 3, it writes to SD memory card.

・Select OFF and press for each type 1, 2, and 3, it doesn't write to SD memory card.

Type1: Instantaneous value file

Type2: Difference value file

Type3: Instantaneous value in detail file

*Refer to Chapter 5.4 for the detail contents of each file.

*Log cycle is fixed to 1-hour for type 1 and type 2.

Log cycle setting mode

Mode defines save cycle for type 3 file.

・Select from 1 / 5 / 10 / 15 / 30 / 60 (min).

It saves measured data with selected cycle.

Calendar timer setting mode

Mode defines the year, month, day and time.

・ Set year -> month -> date -> hour-> minute ->second.

・ You can set the range of 2000 Jan. 1

*Do not set the false date, or it might occur a malfunction.

Initialize memory of the main unit by 'initialize memory of main unit' (MODE4) after this setting. When it

is not initialized, it may not display log data correctly.

Initialize memory of main unit

Use to initialize memory of main unit and delete the saved logging data (measured data).

Use when you want to delete the logging data such as changing a measured load and so on.

・Select OFF and press , it doesn't initialize.

・Select ON and press , it initialize memory of main unit. Any key doesn't work during initializing.

*Initialize memory of main unit at the below timing, if it is not initialized, it may not display log data

correctly.

when start using the unit, when it continues power off or no battery.

when change the power input type setting, when change the calendar timer setting

*It doesn't reset the displayed integrated value.

OFF

VER

FILE

LOG

*Only when 'ON' is selected for T3 (type3) on saved file type setting mode.

CAL

st

00:00:00 to 2099 Dec. 31

S.FMT

27

KW1M-H Eco-POWER METER

st

23:59:59.