GasAlertMaxXT II
User Manual
Cal IR Lock Enabled (optional)
11. If the Cal IR Lock option is enabled in Fleet Manager II,
the following screen displays.
If IR LOCK ENABLED is enabled, the sensor(s) must be
calibrated using the IR Link or the MicroDock II station.
For more information, refer to
Options.
18
Cal IR Lock
in User
If Previous Bump Failed
If the last bump test performed was unsuccessful, the
following screens display.
BW Technologies by Honeywell recommends the sensor(s) be
bump tested immediately.
Bump Test
BW Technologies by Honeywell recommends to bump test the
sensors before each day's use to confirm their ability to
respond to gas by exposing the detector to a gas concentration
that exceeds the alarm setpoints.
Note
Note