Table of Contents
Aux. Emission Control Devices
Vacuum Passage Inspection
Start engine and run it at idle speed. Disconnect vacuum hose (1) from EVAP canister purge valve (2). With finger
placed against hose disconnected, check that vacuum is applied.
If it is not applied, clean vacuum passage by blowing compressed air.
Vacuum Hose Inspection
Check hoses for connection, leakage, clog and deterioration.
Replace as necessary.
Repair Instructions
Aux. Emission Control Devices:
I2RH0B120003-01
I2RH0B120004-01
1B-1
S3RH0B1206005
S3RH0B1206006
- Quick Links:
- Engine
Hide quick links:
Table of Contents
