Setting User Group Password Control Parameters - HP 5120 SI Series Security Configuration Manual
Hide thumbs
Also See for 5120 SI Series:
- Command reference manual (395 pages) ,
- Installation manual (48 pages) ,
- Specification (33 pages)
Table of Contents
To do...
Specify the maximum number of
login attempts and the action to be
taken when a user fails to log in
after the specified number of
attempts
Set the number of days during
which the user is warned of the
pending password expiration
Set the maximum number of days
and maximum number of times that
a user can log in after the
password expires
Set the authentication timeout time
Set the maximum account idle time
CAUTION:
The action specified the password-control login-attempt command takes effect immediately and affects
the users already in the password control blacklist. Other password control configurations take effect only
for users logging in later and passwords configured later.
Setting user group password control parameters
Follow these steps to set password control parameters for a user group:
To do...
Enter system view
Create a user group and enter user
group view
Configure the password aging
time for the user group
Configure the minimum password
length for the user group
Configure the password
composition policy for the user
group
Use the command...
password-control login-attempt
login-times [ exceed { lock | unlock
| lock-time time | unlock } ]
password-control
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control
authentication-timeout
authentication-timeout
password-control login idle-time
idle-time
Use the command...
system-view
user-group group-name
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
200
Remarks
Optional
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
one minute before trying again.
Optional
7 days by default
Optional
By default, a user can log in three
times within 30 days after the
password expires.
Optional
60 seconds by default
Optional
90 days by default
Remarks
—
—
Optional
By default, the aging time of the
user group is the same as the
global password aging time.
Optional
By default, the minimum password
length of the user group is the
same as the global minimum
password length.
Optional
By default, the password
composition policy of the user
group is the same as the global
password composition policy.
Table of Contents
Troubleshooting
