GE DigitalFlow XGM868i Startup Manual page 42

Chapter 2. Initial Setup

2.4.1c

Selecting Mass Flow Units

1. Scroll to the desired Mass Flow units for the flow rate display and press [Enter]. The available units for this prompt

are determined by the selection made at the System Units screen. See Table 7.

2. Scroll to the desired Mass Flow Time units for the mass flow rate display (from seconds to days) and press [Enter].

3. Scroll to the desired number of Mdot Dec. Digits (digits to the right of the decimal point in the mass flow rate

display) and press [Enter].

4. Scroll to the desired Mass (Totalizer) units for the totalized mass flow rate display and press [Enter]. The available

units for this prompt are determined by the selection made at the System Units prompt.

5. Scroll to the desired number of Mass Dec. Digits (digits to the right of the decimal point in the totalized mass flow

rate display) and press [Enter].

6. After completing the above steps, the XGM868i returns to the Global PROGRAM window. Press [Escape] and

scroll to CH1 or CH2 to continue setup programming.

34

Table 7: Available Mass Flow Units

English

LB = Pounds

KLB = Thousands of LB

MMLB = Millions of LB

Tons (2000 LB)

Metric

Kilograms

Metric Tons (1000 KG)

DigitalFlow™ XGM868i Startup Guide