2
SYSTEM CONFIGURATION
2.4
Use in Multiple CPU System or Redundant CPU System
To access a multiple CPU system or redundant CPU system, the "Target setting" screen
setting must be completed.
Section 8.4.8 Target setting screen
POINT
When a CC-Link IE Controller Network board with a serial number whose first five
digits are 10091 or lower, or an SW1DNC-MNETG-B with the software Version
1.04E or earlier is used, the redundant CPU system cannot be accessed directly
with the CC-Link IE Controller Network interface board.
Relay the MELSECNET/H network system to access the redundant CPU system.
2.4 Use in Multiple CPU System or Redundant CPU System
1
2
3
4
5
6
7
8
2
- 6