Table of Contents
8.1.2.
Handset
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
1). Press
2). Select "Settings" using
3). Enter "7", "2", "6", "2", "7", "6", "6", "4".
4). Select "Write EEP" using
5). Enter " ", " ", " ", " " (Address). (*1)
6). Enter " ", " " (New Data). (*1)
7). Press
8). Press
Dial keypad
H/S key operation
{
}
MENU
.
{^}
{
}
then press
SELECT
or
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
{
}
then press
SELECT
or
{
}
OK
, a long confirmation beep
will be heard.
{OFF}
to return to standby mode.
After that, remove and reinsert the batteries. Press the Power button for
about 1 second if the power is not turned on.
KX-TGE240/242/243/244/245/260/262/263/264/270/272/273/274/275/TG454/TG465/TGEA20/TGA20
{OFF}
{FLASH}
{CALL WAIT}
{V}
or
{>}
.
{^}
{V}
or
{>}
.
29
H/S LCD
Service Mode
Read EEP
Write EEP
BACK
SELECT
Set Addr.:
Default Data
CLEAR
OK
Set Addr.:
New Data
CLEAR
OK
Set Addr.:
_ _ _ _
_ _
BACK
Hide quick links:
Table of Contents
