Table of Contents
MI C
LE VE L
MIC
Programming track numbers
You can select tracks and store them either in the CD changer
or CD recorder memory. If you use the program for playback
you can choose one of the two memories, else if you like to
specify tracks for recording, use the CD changer memory only!
You can store any track more than once.
1 Load the desired disc(s) in the disc tray(s).
2 Press either CD 1, CD 2, CD 3, or CDR to select the disc.
3 Press PROG on the set (PROGRAM on the remote control).
starts blinking and
y
PROG
4 If either CD 1, CD 2 or CD 3 is selected:
Rotate í JOG CONTROL ë to select either:
(or , )
: All tracks of CD 1 (or 2, 3) will be
y
programmed.
(or , ) and track number: The track number of
y
CD 1 (or 2, 3) will be programmed.
If CDR is selected:
Rotate í JOG CONTROL ë (press the numerical keys on
the remote control; for 2-digit numbers, press the keys in
rapid succession) to select a track number.
5 Press YES to store your selection in the memory.
The number of programmed tracks (
y
total program time are displayed. The track number
blinks in the music calendar.
6 Select and store all desired tracks in this way.
7 Press PROG on the set (PROGRAM on the remote control) to
end programming.
stays shown and the program is currently available.
y
PROG
Note: If the maximum number of programmable tracks is
reached, the display shows
Erasing a track from the program
1 If necessary press Ç STOP on the set (Ç on the remote
control) to stop playback.
2 Press either CD 1, CD 2, CD 3, or CDR to select the desired
memory.
3 Press PROG (PROGRAM on the remote control), followed by
à SEARCH or á SEARCH (à or á on the remote
control) to move through the program steps.
y
4 Press NO to remove the track from the program.
y
y
Clearing the program
1 If necessary press Ç STOP on the set (Ç on the remote
control) to stop playback.
2 Press NO.
is displayed.
y
3 Press YES to clear the program.
y
Note: When you open the CD recorder tray or the CD changer
Making a program for recording
1 Select and store all desired tracks in the CD changer
memory (see "Programming track numbers").
2 Enter the recording menu (see "Internal recording").
• If the total time of the program is of bigger size than the
),
and the
STEP
remaining recording time of the CDR(W):
y
If you nevertheless start recording, only those tracks of the
program that fit onto the CDR(W) will be recorded in entirety.
•To change the program press NO.
y
.
The track number at the selected step and the total
program time are displayed.
is displayed briefly.
The next programmed track number will move up to this
position and is displayed together with the step number
and the remaining total program time.
is displayed.
will be displayed and
tray the respective program will be cleared.
will be displayed briefly, followed by
the remaining recording time and
will be displayed briefly,
time of the program start blinking. Now you can change
the program (see "Programming track numbers", "Erasing
a track from the program" and "Clearing the program").
PROGRAM
goes off.
PROG
and the
PROG
15
- Quick Links:
- Setup Information
- Technical Data
Hide quick links:
Table of Contents
