Table of Contents
Appendix
A.6 Notes on Repackaging [fi-7700/fi-7700S]
Fixing the Transport Lock
Fix the transport lock so that the flatbed is not damaged during
transport.
The procedure for fixing the transport lock is as follows:
1
Turn on the scanner.
The carrier unit stops in about 10 seconds.
2
Turn off the scanner.
3
Remove the ADF paper chute (feeder), stacker, and
cables.
Cables
Stacker
4
ADF Paper Chute
(Feeder)
Remove the stacker in the following procedure:
1 Check that the stacker is placed in the lower position.
1
2 Hold the center (
) of the stacker and slightly bend it to remove
2
the right side (
) of the stacker from the slot in the direction of
the arrow.
1
Turn the transport lock towards the fixing side by using a
coin or something similar to fix it.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
2
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
217
- Quick Links:
- Parts and Functions
Hide quick links:
Table of Contents
Troubleshooting
