Quick Start Guide / Produktinformation
NC: 6540-90251
Dongle installation
For the operation of the A6855 server / requester software a USB hardware-dongle is re
quired. For installation of the necessary dongle software "Dongle installation" has to be se
lected as shown in Figure 2. First, install the software before you connect the dongle to the
computer.
Figure 2
CAUTION
Do not disconnect the dongle during operation. The program controls continuously the
availability of dongle. If the dongle is not recognized, the server / requester will be abor
ted.
NOTICE
If the server / requester MMS 6855 is used together with the process management sys
tem AMS Asset Graphics, the server / requester can be unlocked in the AMS Asset Graph
ics dongle. In this case, an additional dongle is not necessary.
If necessary, the dongle driver can be installed later. After standard installation, the required
files can be found in the directory "C:\Program\Emerson Process Management\CSI 6500
Configuration\Dongle". The dongle directory contains the driver software and additional in
formation. A double click on "haspdinst.exe" opens a window with installation instructions.
Installation guidance
Dongle selection
English
11.12.2012
4