Page 2
Repairs or calibration that Europe may be required, are only possible at epro GmbH (part Emerson Akciova Spolocnost - div. ESAD of Emerson Process management group). MHM Repair Center In this case, a non-detachable tag with customer Piestanka 1202/44 name, defect observed and version of the A 6910 con...
Page 3
If repair or recalibration is required, it must be sent to Description of the problem Emerson. Attach a non-detachable tag to the Return shipping address including a monitor with customer name, defect observed and phone number (No P.O. boxes). version of the A6910 configuration software. The respective addresses can be found under „Product...
Page 4
RMA Required Information Company Name: RMA number issued by Product Contact Name: Service Centre: Contact Address: For all items being returned, please list Model / Serial Number: Contact Phone: Contact Fax: Contact Email: Please describe the problem you are experiencing: Are you under warranty or a current support agreement (circle one)? If you answered no, what is your pur...
Page 5
Gerätes zu ermöglichen. Eventuell erforderliche MHM Repair Center Reparaturen oder Kalibrierungen sind nur im Werk der Piestanka 1202/44 epro GmbH part of Emerson Process Management 915 28 Nove Mesto nad Vahom möglich. Slowakia In diesem Fall ist das Gerät mit einem unverlierbaren Anhänger mit Kundenname, festgestellter Bean...
Page 6
Ist die Reparatur oder (Re‐)Kalibrierung eines Gerätes Beschreibung des Problems erforderlich, so ist es an Emerson zu senden. Das Rücksendeadresse einschließlich Gerät ist mit einem unverlierbaren Anhänger mit Telefonnummer (kein Schließfach). Kundenname, festgestellter Beanstandung und Version der Konfigurationssoftware A6910 zu Eventuelle Sonderwünsche...
Page 7
RMA Erforderliche Informationen Firmenname: RMA Nummer vom Produkt Ser vice Zentrum: Name des Ansprechpartners: Kontaktadresse: Für alle zurückgesendeten Teile, bitte Typ und Seriennummer eintra gen: Telephon: Fax: Email: Beschreiben sie bitte ihr Problem: Sind Geräte noch Garantiezeit oder besteht ein War tungsvertrag (zutreffendes ankreuzen)?
Page 8
Symbol explanation Quick Start Guide / Produktinformation 11.12.2012 NC: 6540-90251 Symbol explanation NOTICE This symbol marks passages that contain important information. CAUTION Notes, that may lead to malfunctions or faulty measurements without damaging the device, are marked with this symbol. Without safety alert symbol, this symbol is used to address practices not related to personal injury (ANSI Z 535.6) DANGER Safety and warning notes are marked with this symbol.
MMG 520+ as well as the MMS 6855 Sever/Requester. For the CSI 6500 Configura tion Software a start menu entry will be generated during the installation procedures. All other programs can be found after standard installation in the folder “C:\Program Files\Emerson Process Management\CSI 6500 Configuration”. Table 2 shows all available programs. Table 2...
Quick Start Guide / Produktinformation English NC: 6540-90251 11.12.2012 System requirements PC or Laptop must satisfy the following minimum requirements in order to install and load the software: Table 3 System requirements Parts Requirements Processor / Graphics / RAM In accordance to the requirements of the operating system Unallocated hard disc min.
English Quick Start Guide / Produktinformation 11.12.2012 NC: 6540-90251 Installation guidance 1.3.1 Installation of the CSI Configuration software • Close all running applications and place the CD into the CD ROM drive of your computer. Open the CD and start the file “index.html”. A browser window with the following graphic will be displayed: Figure 1 Menu of the SW- CD...
Page 14
In this case, an additional dongle is not necessary. If necessary, the dongle driver can be installed later. After standard installation, the required files can be found in the directory “C:\Program\Emerson Process Management\CSI 6500 Configuration\Dongle”. The dongle directory contains the driver software and additional in...
After successful installation you can start the software by double clicking the icons on the desktop (Figure 3), or by choosing the software from the program folder (“Start” → “Programs” → “Emerson Process Management” → “ CSI 6500 Configuration“). Figure 3 Desktop- Icon All programs listed in Table 2 can be started by a double click on the respective *.exe - file...
Quick Start Guide / Produktinformation English NC: 6540-90251 11.12.2012 1.3.2.1 First Log-in All programs have a user administration hence a log-in at the program start is required (Figure 4). For the first log-in use the following log-in details for entering as “Operator”: first Password: user...
English Quick Start Guide / Produktinformation 11.12.2012 NC: 6540-90251 Reading and Printing the Operation Manuals In addition to the CSI configuration software the CD contains the manuals for all devices sup ported by the software in their (at delivery) current version. To display and print the English operating manual, click on „Documentation (English)“...
Quick Start Guide / Produktinformation English NC: 6540-90251 11.12.2012 1.5.3 SMB to BNC adapter SMB to BNC adapter length approx. 30 mm connector (Input) Subclic SMB connector connector (Output) 1.5.4 USB to RS232 converter USB to RS232 converter Specification Spectra 112315 USB to RS-232 converter Length of the included USB connection approx.
System und den MMG 520+ sowie die MMS 6855 Server / Requester Software. Für die CSI 6500 Konfigurationssoftware wird während der Installation ein Eintrag in das Startmenü er stellt. Alle anderen Programme befinden sich nach der Standardinstallation im Verzeichnis „C:\Programme\Emerson Process Management\CSI 6500 Configuration”. Tabelle 2 zeigt die verfügbaren Programme. Tabelle 2...
Quick Start Guide / Produktinformation Deutsch NC: 6540-90251 11.12.2012 Systemvoraussetzungen Zur Installation und Ausführung der Programme muss der PC oder Laptop folgende Minimal vorraussetzungen erfüllen: Tabelle 3 Systemvoraussetzungen Bestandteil Voraussetzung Prozessor, Grafik, Entsprechend den Systemvoraussetzungen des Betriebssystems Arbeitsspeicher freier Festplattenspeicher mindestens 300 MB Betriebssystem Windows XP (SP2) oder Windows 7 32Bit/64Bit...
Deutsch Quick Start Guide / Produktinformation 11.12.2012 NC: 6540-90251 Installationsanweisung 2.3.1 Installation der CSI Konfigurationssoftware • Schließen Sie alle geöffneten Anwendungen und legen Sie bitte die CD in das ent sprechende Laufwerk Ihres PCs/ Laptop. Öffnen Sie die CD und starten an schließend die Datei „index.html“.
Page 22
Der Dongle*Treiber kann bei Bedarf nachträglich installiert werden. Die benötigten Da teien finden Sie nach der Standardinstallation im Verzeichnis “C:\Programme\Emerson Pro cess Management\CSI 6500 Configuration\Dongle". Dieses Verzeichnis enthält den Dongle treiber und weitere Informationen. Ein Doppelklick auf „haspdinst.exe“ öffnet ein Fenster mit Installationsanweisungen.
Desktop, oder durch Auswahl der Software im Programmordner („Start“ → „Programme“ → „Emerson Process Management“ → „CSI 6500 Configuration“) starten. Bild 3 Desktop- Icon Alle Programme der Tabelle 2 können mit einem Doppelklick auf die entsprechende *.exe- Datei (C:\Programme\Emerson Process Management\CSI 6500 Configuration - nach Stan dardinstallation) gestartet werden. Installationsanweisung...
Quick Start Guide / Produktinformation Deutsch NC: 6540-90251 11.12.2012 2.3.2.1 Erstanmeldung Alle Programme verfügen über eine Benutzerverwaltung. Daher ist nach dem Programm start eine Anmeldung erforderlich (Bild 4). Die folgenden Anmeldedaten sind für die Erstan meldung als „Bediener“. first Passwort: user Bei der Eingabe von ID und Passwort ist auf die Groß- und Kleinschreibung zu achten.
Deutsch Quick Start Guide / Produktinformation 11.12.2012 NC: 6540-90251 Lesen und Drucken der Gebrauchsanleitungen Neben der CSI Konfigurationssoftware beinhaltet die CD auch die zum Lieferzeitpunkt aktu ellen Versionen der, den Produkten entsprechenden, Bedienungsanleitungen. Zum Anzeigen und Drucken der deutschen Gebrauchsanleitungen klicken Sie auf „Docu mentation (German)“...
Quick Start Guide / Produktinformation Deutsch NC: 6540-90251 11.12.2012 2.5.3 SMB zu BNC Adapter SMB zu BNC Adapter Länge ca. 30 mm Anschluss (Eingangsseitig) Subclic SMB Anschluss Anschluss (Ausgangsseitig) 2.5.4 USB zu RS232 Umsetzer USB zu RS232 Konverter Bezeichnung Spectra 112315 USB nach RS-232 Wandler Länge des beiliegenden USB ca.
List of Changes / Änderungsliste Quick Start Guide / Produktinformation 11.12.2012 NC: 6540-90251 Chapter 3: List of Changes / Änderungsliste Version Datum / Date Änderung / Changes 1.000 11.12.2012 Ausgabeversion / Release Version...
Page 28
All rights reserved. Machinery Health is a mark of one of the Emerson Process Management group of companies. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their respective owners.