Power Supply Specification; Performance Specification - Mitsubishi FX3U-20SSC-H User Manual
Hide thumbs
Also See for FX3U-20SSC-H:
- User manual (304 pages) ,
- User manual (184 pages) ,
- Quick start manual (19 pages)
Table of Contents
FX
-20SSC-H Positioning Block User's Manual
3U
3.2
Power Supply Specification
External power
supply
Internal power
supply
3.3
Performance Specification
Item
Number of control axes
Backup
Applicable PLC
No. of occupied I/O points
Connectable servo amplifier
Servo bus
Scan cycle
Control input
Parameter
Control data
Monitor data
Positioning program
Method
Unit
Unit magnification
Positioning range
Speed command
Positioning
Acceleration/
deceleration
process
Starting time
Interpolation
function
Item
Power supply voltage
24V DC +20% -15% Ripple (p-p) within 5%
Permitted instantaneous
Operation continues when the instantaneous power failure is shorter than 5ms.
power failure time
Powerconsumption
5W
Power fuse
1A
PLC power supply
100mA /5V DC
2 axes
Positioning parameters, servo parameters, and table information can be saved to flash memory
Write count: Maximum 100,000 times
FX
/FX
PLC
3U
3UC
An FX
-CNV-IF or FX
2NC
A maximum of 8 units/blocks can be connected with the FX
A maximum of 7 units/blocks can be connected with the FX
8 points (input or output, whichever may be counted)
MELSERVO MR-J3- B
Maximum 2 amplifiers can be connected
Standard cord length
Long distance cord length : Station to station maximum 50m (164')
SSCNET III
1.77ms
Interrupt input
DOG
START input
Manual pulse generator : 1 input per axis (A/B-phase)
Positioning parameter
Servo parameter
Ver. 1.10 or later
Earlier than Ver. 1.10
Ver. 1.20 or later
Earlier than Ver. 1.20
Created by sequence programs (using FROM/TO instruction, etc.)
Direct operation (1 for X and Y axes respectively)
Table operation (300 tables for X, Y, and XY axes respectively)
Increment/Absolute
-4
PLS,µm, 10
inch, mdeg
1, 10, 100, and 1000-fold
-2,147,483,648 to 2,147,483,647 PLS
Hz, cm/min, inch/min, 10deg/min
Trapezoidal acceleration/deceleration, S-pattern acceleration/deceleration: 1 to 5,000ms
Only trapezoidal acceleration/deceleration is available for interpolation
1.6ms or less
2-axes linear interpolation, 2-axes circular interpolation
Specification
Specification
-1PS-5V is necessary to connect the 20SSC-H with the FX
3UC
: Station to station maximum 20m (65'7")
: 2 inputs (INT0 and INT1) per axis
: 1 input per input axis
: 1 input per axis
: Ver. 1.20 or later
25 types
Ver. 1.10 or later
22 types
Earlier than Ver. 1.10
21 types
: 50 types
: 20 types
: 17 types
: 31 types
: 26 types
3 Specifications
3.2 Power Supply Specification
PLC.
3UC
PLC.
3U
PLC.
3UC
1
2
3
4
5
6
7
8
9
10
21
Table of Contents
