Quick Links
See also:
User Manual
JY997D26401A
FX
-232ADP-MB
3U
Installation Manual
Manual Number
JY997D26401
Revision
A
Date
April 2007
This manual describes the part names, dimensions, mounting, and
specifications of the product. Before use, read this manual and manuals of
relevant products fully to acquire proficiency in handling and operating the
product. Make sure to learn all the product information, safety information, and
precautions.
And, store this manual in a safe place so that you can take it out and read it
whenever necessary. Always forward it to the end user.
Registration
®
MODBUS
is a registered trademark of Schneider Electric S.A.
The company name and the product name to be described in this manual are
the registered trademarks or trademarks of each company.
Effective April 2007
Specifications are subject to change without notice.
©
2007 Mitsubishi Electric Corporation
Safety Precaution
(Read these precautions before use.)
This manual classify the safety precautions into two categories:
and
.
Indicates that incorrect handling may cause hazardous
conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous
conditions, resulting in medium or slight personal injury
or physical damage.
Depending on circumstances, procedures indicated by
linked to serious results.
In any case, it is important to follow the directions for usage.
Associated Manuals
Manual name
Manual No.
Description
Explains FX
3U
FX
Series
JY997D16501
3U
specification details for I/O,
User's Manual
MODEL CODE:
w i r i n g , i n s t a l l a t i o n , a n d
- Hardware Edition
09R516
maintenance.
FX
/FX
Series
3U
3UC
JY997D16601
Describes PLC programming
Programming Manual
MODEL CODE:
for basic/applied instructions
- B a s i c & A p p l i e d
and devices.
09R517
Instruction Edition
FX Series User's
Explains N:N link, parallel
JY997D16901
Manual
link, computer link, no
MODEL CODE:
- Data Communication
protocol communication by
09R715
RS instructions/FX
Edition
FX
3U
Series User's
Manual
Explains the MODBUS serial
JY997D26201
- MODBUS Serial
communication network.
Communication Edition
How to obtain manuals
For the necessary product manuals or documents, consult with the Mitsubishi
Electric dealer from where you purchase your product.
Certification of UL, cUL standards
The FX
3U
-232ADP-MB unit supports UL and cUL standards.
UL, cUL file number :E95239
Compliance with EC directive(CE Marking )
This document does not guarantee that a mechanical system including this product will
comply with the following standards.
Compliance to EMC directive of the entire mechanical system should be checked by
the user / manufacturer. For more details please contact the local Mitsubishi Electric
sales site.
Requirement for Compliance with EMC directive
The FX
-232ADP-MB is compliant through direct testing (of the identified standards
3U
below) and design analysis (through the creation of a technical construction file) to the
European Directive for Electromagnetic Compatibility (89/336/EEC) when used as
directed by the appropriate documentation.
Standard
EN61131-2:2003
Compliance with all relevant aspects of the
Programmable controllers
standard.
- Equipment requirements and
• Radiated Emissions
tests
• Mains Terminal Voltage Emissions
• RF immunity
• Fast Transients
• ESD
• Voltage drops and interruptions
• Conducted
• Power magnetic fields
Caution for compliance with EC Directive
Installation in Enclosure
Programmable logic controllers are open-type devices that must be installed and used
within conductive control boxes. Please use the FX
controllers while installed in conductive shielded control boxes. Please secure the
control box lid to the control box (for conduction). Installation within a control box
greatly affects the safety of the system and aids in shielding noise from the
programmable logic controller.
1. Outline
The FX
-232ADP-MB communication special adapter (hereinafter called 232ADP-
3U
may also be
MB) is a special adapter for RS-232C communication with an 9-pin D-Sub connector.
232ADP-MB is an isolated signal exchange unit of the RS-232C serial data
communication between the PLC and RS-232C device.
The FX
3U
-232ADP-MB features all functionality that is available with the FX
232ADP, except that it also has MODBUS communication available.
1.1 Communication Function
Communication type
Series PLC
Data transfer via dedicated protocol between PLC and
Computer link
computer (specified as the master station).
Non-protocol
Serial communication via non-protocol between PLC and
communication
RS-232C device.
Programming
Optional port available for suitable programming tool when
communication
232ADP-MB is connected to PLC.
Program transfer or monitoring enabled via modem and
Remote maintenance
phone line connected to serial port of PLC.
-232IF.
2N
MODBUS
Data transfer between a master and a slave.
communication
1.2 Incorporated Items
Check if the following product and items are included in the package:
Product
Manual
FX
-232ADP
3U
-MB
POWER
RD
SD
manual
1.3 External Dimensions, Part Names, and Pin Configuration
1.3.1
External Dimensions and part name
[3]
[2]
[1]
Remark
7(0.28")
Special adapter
connector cover
is removed
• Surge
[1] DIN rail mounting groove (DIN rail: DIN46277)
[2] Name plate
[3] Special adapter slide lock:
Used to connect special adapter on left side of this special adapter.
[4] Special adapter connector cover:
Remove this cover for connecting special adapter on the left side.
[5] Direct mounting hole:2 holes of φ4.5 (0.18") (mounting screw: M4 screw)
Series programmable logic
3U
[6] POWER LED (green): Lit while 5V DC power is supplied from main unit.
[7] RD LED (red):
Lit while receiving data from connected RS-232C device.
[8] SD LED (red):
Lit while sending data to connected RS-232C device.
[9] Special adapter connector:
Used to connect this special adapter to PLC main unit or special adapter.
[10] RS-232C connector (9-pin D-Sub, male):
Connect RS-232C device to this RS-232C connector
[11] Screws to fix a cable connector: Screw holes #4-40UNC (inch screw thread)
3U
-
[12] DIN rail mounting hook
[13] Special adapter fixing hook
[14] Special adapter connector:
Used to connect communication special adapter or analog special adapter to
this adapter on left side.
Function
This
1.4 Pin Configuration
The pin configuration of the RS-232C port on the 232ADP-MB is as shown below.
[13]
Screws to fix
[4]
[5]
RS-232C
connector
[6]
FX
-232ADP
3U
-MB
[7]
5
[8]
[9]
1
Screw holes:
#4-40UNC
[10]
(inch screw
thread)
[11]
7.5
74(2.92")
15.1
(0.29")
[12]
(0.6")
[14]
17.6
(0.7")
2. Channel Allocation
Weight: Approx. 80g (0.18 lbs)
Up to two communication ports can be added to the main unit.
Communication
communication special adapter to the main unit is ch1.
• Using one communication special adapter + communication expansion board
• Using two communication special adapters
Pin
Signal
Name
Function
No.
Receive
ON when carrier for data reception
1
CD
carrier
is detected.
detection
(RS-232C device to 232ADP-MB)
9
RD
Receive
Receive data
2
(RXD)
data
(RS-232C device to 232ADP-MB)
6
SD
Send data
3
Send data
(TXD)
(232ADP-MB to RS-232C device)
ON when RS-232C device is ready
ER
Send
4
to receive data.
(DTR)
request
(232ADP-MB to RS-232C device)
SG
Signal
Signal ground
5
(GND)
ground
(232ADP-MB to RS-232C device)
ON when send request is made
DR
Send
6
toward RS-232C device.
(DSR)
enable
(RS-232C device to 232ADP-MB)
7,8,9 Not used
Do not wire.
port
channels
are
automatically
allocated.
The
Communication
(ch2)
expansion board (ch1)
Analog
Analog
FX
-
Analog
Analog
3U
special
special
232ADP
special
special
Main unit
function
function
-MB
function
function
adapter
adapter
adapter
adapter
(ch2)
(ch1)
FX
-CNV-BD
3U
Analog
Analog
FX
-
Analog
Analog
FX
-
3U
3U
special
special
232ADP
special
special
232ADP
Main unit
function
function
-MB
function
function
-MB
adapter
adapter
adapter
adapter
closer
Related Manuals for Mitsubishi FX3U-232ADP-MB
Summary of Contents for Mitsubishi FX3U-232ADP-MB
- Page 1 (RS-232C device to 232ADP-MB) Compliance to EMC directive of the entire mechanical system should be checked by Installation Manual Receive Receive data the user / manufacturer. For more details please contact the local Mitsubishi Electric (RXD) data (RS-232C device to 232ADP-MB) sales site.
- Page 2 MODBUS Warranty procedures similarly.) Mitsubishi will not be held liable for damage caused by factors found not to be 5) Connect the The version number can be checked by monitoring D8001, as well the last three digits the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the special adapter indicate the version number.